Re:gear grinding
or your syncros/shift arms are taking a ----. |
Re:gear grinding
so thiker oil... i know the motor mounts are ok. for the shift linkage.. is a little play good or should it be stiff ?
|
Re:gear grinding
you aren't supposed to run thick oil in honda trannies, you're supposed to run 10w-30.
My tranny is about to die, it growls and i can feel it through the shifter. It was low on oil because it leaked : ( oh well, it's a cx tranny anyways |
Re:gear grinding
i just decided to check my fluid level in my tranny and it took almost a whole quart of 10w30 :o, i guess thats why it has been so hard to get into second and when i woul djiggle the shifter in neutral i would hear it clunking around in the tranny. it's a dx tranny anyways and i have a new ex one i'm about to put in once it warms up.
|
Re:gear grinding
Originally Posted by SunshineSketches
you aren't supposed to run thick oil in honda trannies, you're supposed to run 10w-30.
My tranny is about to die, it growls and i can feel it through the shifter. It was low on oil because it leaked : ( oh well, it's a cx tranny anyways |
Re:gear grinding
are you sure about that? I don't see a difference in running thicker oil and overfilling with oil, and i have heard overfilling oil can damage things. So how could putting in too thick of oil not hurt the gears, especially if it was cold weather. Just looking for a clear explanation.
|
Re:gear grinding
Originally Posted by SunshineSketches
are you sure about that? I don't see a difference in running thicker oil and overfilling with oil, and i have heard overfilling oil can damage things. So how could putting in too thick of oil not hurt the gears, especially if it was cold weather. Just looking for a clear explanation.
|
Re:gear grinding
thicker oil, esp. GEAR OIL will kill a tranny........
The oil ended up not making it into the roller bearings under the gearsets. Smoked them. 3rd gear grinds on a 88-00 SOHC Tranny, cure is in this order shifter bushings, motor mounts, 1-2 shifter fork. If you have a 4th gear grind also, then likely you broke 3-4 shifter fork. I've only seen two of these. |
Re:gear grinding
Originally Posted by Mista Bone
thicker oil, esp. GEAR OIL will kill a tranny........
The oil ended up not making it into the roller bearings under the gearsets. Smoked them. 3rd gear grinds on a 88-00 SOHC Tranny, cure is in this order shifter bushings, motor mounts, 1-2 shifter fork. If you have a 4th gear grind also, then likely you broke 3-4 shifter fork. I've only seen two of these. |
Re:gear grinding
I've got soo many pics of dead trannys, I cannot find them all!!!!!!!!!
So I give you this........... http://www.bettendorf.com/~mrbone/pi...DOAtranny1.jpg |
All times are GMT -5. The time now is 04:33 AM. |
© 2024 MH Sub I, LLC dba Internet Brands