HomemadeTurbo - DIY Turbo Forum

Hybrid/Tech B16 / B18 / ZC / D16 / H22 / Mini-Me Ask your Honda Engine Questions here.

Eagle rod problem or did i get fucked

Thread Tools
 
Search this Thread
 
Old Jan 12, 2008 | 03:48 AM
Share
  #1  
civicsihatch09's Avatar
civicsihatch09
Thread Starter
1.0 BAR
 
Joined: Sep 2006
Posts: 221
Default Eagle rod problem or did i get fucked
I bought these on egay advertised as d16 eagle rods.
They don't fit down the cylinder bore.
I think they are ls rods.Or is there any special
way these rods go in.The vitara piston pin fits fine.


Reply
Old Jan 12, 2008 | 08:05 AM
Share
  #2  
rudebwoy's Avatar
rudebwoy
3.0 BAR
 
Joined: Mar 2003
Posts: 4,217
Default Re: Eagle rod problem or did i get fucked
thats kinda hard to beleive. aint no way a eagle rod journal bigger than a d16 bore (77mm correct?)
those might be for a big block v8 or something
Reply
Old Jan 12, 2008 | 09:43 AM
Share
  #3  
ifly87's Avatar
ifly87
3.0 BAR
 
Joined: Dec 2005
Posts: 2,081
Default Re: Eagle rod problem or did i get fucked
My scat's BARELY fit, I had to wiggle them back and forth all the way down . I thought I heard of that. does the crank end hole measure up to the journal on the crank?
Reply
Old Jan 12, 2008 | 11:48 AM
Share
  #4  
Oscar's Avatar
Oscar
0.0 BAR
 
Joined: Jun 2005
Posts: 0
From: WA
Default Re: Eagle rod problem or did i get fucked
That looks like a bigger rod end bore than the crank rod journals are too.

you got scammed.

maybe they're from LSx
Reply
Old Jan 12, 2008 | 01:01 PM
Share
  #5  
civicsihatch09's Avatar
civicsihatch09
Thread Starter
1.0 BAR
 
Joined: Sep 2006
Posts: 221
Default Re: Eagle rod problem or did i get fucked
My bore is 75 mm i did not have them bore it bigger.
When i put the eagle rod on the crank with bearings on,
it has a little play.So in this picture i put the eagle rod up against
the d16z6 rod.





Reply
Old Jan 12, 2008 | 02:25 PM
Share
  #6  
civicsihatch09's Avatar
civicsihatch09
Thread Starter
1.0 BAR
 
Joined: Sep 2006
Posts: 221
Default Re: Eagle rod problem or did i get fucked
I guess i was wrong they are d series.
You have too clearance the cylinder in
88-95 blocks.
Reply
Old Jan 12, 2008 | 02:51 PM
Share
  #7  
HMTguy
Guest
 
Posts: n/a
Default Re: Eagle rod problem or did i get fucked
You have to notch the bottom of the cylinder. Your rods are wrong if they won't fit in the bore.
Reply
Old Jan 12, 2008 | 03:09 PM
Share
  #8  
con's Avatar
con
0.0 BAR
 
Joined: Nov 2003
Posts: 0
Default Re: Eagle rod problem or did i get fucked
those are definitly wrong
Reply
Old Jan 13, 2008 | 01:18 PM
Share
  #9  
stillnoturbo's Avatar
stillnoturbo
3.0 BAR
 
Joined: Feb 2004
Posts: 7,783
Default Re: Eagle rod problem or did i get fucked
That's just a reason to bore that beast out to something of manly status.
Reply
Old Jan 13, 2008 | 03:13 PM
Share
  #10  
one2many's Avatar
one2many
1.0 BAR
 
Joined: Oct 2007
Posts: 468
Default Re: Eagle rod problem or did i get fucked
Originally Posted by civicsihatch09

wtf dude ? lmao

why are you putting in the rods through the top of the cylinder ?


Reply



Advanced Search

All times are GMT -5. The time now is 02:35 PM.