CRX Si tranny

Reply Subscribe

Thread Tools

Search this Thread

08-02-2006, 10:13 PM

melloyellocrx

0.0 BAR

Thread Starter

Join Date: Apr 2006

Posts: 18

CRX Si tranny

would an Si tranny match up to a DOHC D16a1 integra motor, pretty sure bolt pattern is ok , but splines is my question..... M.Y.CRX

08-02-2006, 10:42 PM

HMTguy

Guest

Posts: n/a

Re: CRX Si tranny

Be more specific than Si tranny.

AFAIK, 90-00 D trannys have the same spline count. Wait for Bone to chime in to verify or cast me down.

08-02-2006, 11:13 PM

melloyellocrx

0.0 BAR

Thread Starter

Join Date: Apr 2006

Posts: 18

Re: CRX Si tranny

Si tranny from a SOHC D series..... everyone says the d16a1 wont bolt in my engine bay

08-02-2006, 11:49 PM

Bone1

0.0 BAR

Join Date: Jan 2005

Posts: 0

Re: CRX Si tranny

bellhousing bolt pattern is different

08-03-2006, 12:37 AM

turbostd

1.0 BAR

Join Date: Dec 2005

Posts: 250

Re: CRX Si tranny

yes it will work kinda... all but one started bolt lines up and you have to grind the block or tranny down a bit for it to work. use the clutch and flywheel that go to the trany. Also if you are puting a a1 in a ef or eg have fun making a driverside mount lol.

08-03-2006, 01:55 AM

melloyellocrx

0.0 BAR

Thread Starter

Join Date: Apr 2006

Posts: 18

Re: CRX Si tranny

yes i saw the mount on HT, no thanks not that interested in doing that, but now have a question, will the pistons from d16a1 fit into a d15b2 to up compression, the motor isnt gonna be turbo tho.... wifes daily driver.....