couple of questions
#1
couple of questions
1)How much hp does a stock ZC make to the wheels?(friend want to know)
2)I have a basically stock D16 and wanted to know what's a good piston and rod setup for me to run now so later I will be able to go turbo?(which company is best and the compression ration I should run)
2)I have a basically stock D16 and wanted to know what's a good piston and rod setup for me to run now so later I will be able to go turbo?(which company is best and the compression ration I should run)
#2
Re:couple of questions
1)How much hp does a stock ZC make to the wheels?(friend want to know)
2)I have a basically stock D16 and wanted to know what's a good piston and rod setup for me to run now so later I will be able to go turbo?(which company is best and the compression ration I should run)
1..what prices are you looking at. cause sometimes prices will affect purchases.
2..what style do you prefer right now so you wont loose power...but gain more later too.
je, wesco, crower, arias, eagle, etc are all great companies. but if you want MORE boost, you'll need lower compression. but your d16 should be around 9.xx already so thats way low enough to not need dropping. because if you drop the comp. lower...it'll affect your daily naturally aspirated power. you'll need lower only if you plan to boost like close to a bar. i've seen way too many boost fine and high on 9. compression. hope this helps. any route you choose from company to price of the products will be fine. as long as you do some research, there should be no hidden problems later. if there is...look for us here to help. good luck
Thread
Thread Starter
Forum
Replies
Last Post
87crexSi
Forced Induction
5
06-05-2008 11:44 PM