Re: Car stopped and won't start
 

No, -17C lol

It was -27C last night tho.

I hope I installed it correctly. There is no white mark on the crank pulley so I placed a long screwdriver in the #1 spark plug hole and find where the dead center was. I placed the camgear the arrow up. Then I installed the belt.

Maybe the belt is of by a tooth on the crank which mean too much teeth on the cam gears...

By the way, by street I mean more something like this:

http://lh6.ggpht.com/_ttHKvikk-8g/ST...0/IMG_0015.jpg

https://lh5.ggpht.com/_ttHKvikk-8g/S...0/IMG_0014.jpg

Re: Car stopped and won't start
 

i still think about timing.

that's what i meant with my "garage" ..

night pic.

http://img300.imageshack.us/img300/7008/dscf5785hv9.jpg

Re: Car stopped and won't start
 

The bitch is running now. The exhaust cam gear was off by a tooth. The exhaust valves were still opened during the explosion. :l

Update on the weather ;D I was working in this today. Snow + rain = not fun...

Still better than -17C tho...

https://lh4.ggpht.com/_ttHKvikk-8g/S...0/IMG_0016.jpg

Re: Car stopped and won't start
 

way to suck it up man. good job

Re: Car stopped and won't start
 

Took you long enough.

Re: Car stopped and won't start
 

It wasn't the best conditions for my first timing belt.

I am in my exam session too, I can't work everytime on my car. I finished it because I had no choice. If they want to remove the snow and my car can't move, I get tow and I have a 55$ fine.

I estimate the total work time to 12 hours.

Re: Car stopped and won't start
 

For a two hour job? Way to go!

Re: Car stopped and won't start
 

Next time I will do it in less than 2 hours :P

Now that I know how to do it.

Next street project: Doing a clutch in the street in 1ft of snow ;)

Re: Car stopped and won't start
 

heated garage FTW

Re: Car stopped and won't start
 

nice to see you fixed bro :y

TB was the problem finally :y