Re: Car stopped and won't start
You took off your starter to replace a timing belt?
|
Re: Car stopped and won't start
I think he was trying to wedge something in the flywheel to take the crank pulley off.
I prefer to have someone sit in the car with it in gear and the brakes on, much easier. |
Re: Car stopped and won't start
Originally Posted by jagojon3
I think he was trying to wedge something in the flywheel to take the crank pulley off.
I tried, but the clutch was sliping :-[ I used my torque wrench to loose it and the bolt was over 250 ft-lbs... My already slipping clutch couldn't take this load. The next step is this damn clutch. I want to do it since like 2 months, but every week something else break and this thing is essential for the car to run. Anyway, the starter is now in one piece. It was a bitch to put the rotor with the four spring in it :7 |
Re: Car stopped and won't start
Originally Posted by Ravage70
put that shitbox out of its misery
|
Re: Car stopped and won't start
I started it today. ---- is starting on 1/4 turn, but it look like the timing is not good.
It looks like the injector put way too much gas, I don't know what is happening. If I start it and wait 20 sec then stop. I unplug injectors and restart it (read no more gas enter in the cylinder), it start like a new one even if it don't last long 2 sec. Maybe it's the timing, but it doesnt explain why it runs great when I unplug injectors... I'll try new things tomorrow ------- around with TE... That's the way I will learn I guess... |
Re: Car stopped and won't start
BTW, when it starts, it rev at like 100 rpms...
|
Re: Car stopped and won't start
timing, order firing ,etc..
i remember when i replace water pum of my ZC DOHC looking that head cover :1 http://img516.imageshack.us/img516/5807/dsc00712uz8.jpg http://img514.imageshack.us/img514/4238/dsc00715zn1.jpg all done i the street :8 http://img229.imageshack.us/img229/8463/dsc00720im1.jpg about stop flywheel, when i replaceed clutch, used screwdriver , not longer necessary, just that be able to be between teeths, i always do that , remove flywheel cover , stop, i use a custom mid exhaust pipe i did of my car (now runing with invidia , ill make my own new SS exhaust system soom), and with my ratchect wrench, get it done. :y that vid posted above,that impact gun sucks.. :l |
Re: Car stopped and won't start
Nice to see I'm not alone ;)
firing order is correct, I'm not sure about the timing. It's -17degree today so I don't want to get out to work on my car lol I did it at -4, but -17 is a bit too cold to handle metal tools. >:( |
Re: Car stopped and won't start
The last pic doesnt looks like you were in the street tho. :P Looks more like a parking
|
Re: Car stopped and won't start
that parking is on the street ;D.
did you installed correctly timing belt? -17 F? :o :o it's like -27º C? idk how you can live there :S |
All times are GMT -5. The time now is 03:09 AM. |
© 2024 MH Sub I, LLC dba Internet Brands