b16 rex.. burning oil like a bitch :(
03-27-2008, 09:19 PM
#122
3.0 BAR
Thread Starter
Join Date: Oct 2005
Posts: 9,282
Re: b16 rex.. burning oil like a bitch :(
Originally Posted by chris
The threads with oil means your valve cover plug gaskets small o rings are blown. The threads are not in the comubustion chamber. If oil is on the ignitor point of the plug will mean damage in the motor. You sir have a couple bad o rings 10 minute fix.
is there any silicone i can safely use to put on the o rings? i changed the valve cover gasket and those o rings for the plugs
Originally Posted by gen4acclude
compression test with the gauge left for like 5 mins to see if there is a pressure drop
here a link
http://www.carcraft.com/techarticles...ter/index.html
here a link
http://www.carcraft.com/techarticles...ter/index.html
03-27-2008, 11:31 PM
#124
1.5 BAR
Join Date: Feb 2008
Posts: 924
Re: b16 rex.. burning oil like a bitch :(
Originally Posted by gen4acclude
compression test with the gauge left for like 5 mins to see if there is a pressure drop
Leakdown is a totally different gauge/tester like the one in your link
03-28-2008, 03:21 PM
#125
3.0 BAR
Join Date: Jun 2005
Posts: 1,623
Re: b16 rex.. burning oil like a bitch :(
Originally Posted by ghettoturbo
...our comp tester holds the highest value unless you realease it, thought most were like that. What good would it be if it didnt hold the high value since unless you stopped at exactly tdc the pressure would make its way out in a hurry.
Leakdown is a totally different gauge/tester like the one in your link
Leakdown is a totally different gauge/tester like the one in your link
03-28-2008, 03:30 PM
#126
Guest
Posts: n/a
Re: b16 rex.. burning oil like a bitch :(
Originally Posted by gen4acclude
you know what i can careless that your a admin and i know its a different gauge i do not need you telling me this hense the link nog, what u feel the need to rip on me cause you have powers of a admin ------ grow up all i did was try to help buk and you flame me for it,
You're a ------- idiot, now I'm flaming you.
03-28-2008, 03:38 PM
#127
3.0 BAR
Join Date: Jun 2005
Posts: 1,623
Re: b16 rex.. burning oil like a bitch :(
Originally Posted by jagojon3
Wow, sounds like you're the one who needs to grow up. How the ---- was he flaming you?
You're a ------- idiot, now I'm flaming you.
You're a ------- idiot, now I'm flaming you.
03-28-2008, 11:04 PM
#128
1.5 BAR
Join Date: Feb 2008
Posts: 924
Re: b16 rex.. burning oil like a bitch :(
Originally Posted by gen4acclude
why would he even comment on it it was totally clear that its a different gauge in the link there was no need to even post a comment quote about my post duh, jagojon lets not start our ---- again im past that
03-29-2008, 12:35 PM
#130
3.0 BAR
Join Date: Apr 2005
Posts: 6,036
Re: b16 compression results in!! see post 41 :(
Originally Posted by chris
Your fine anything over 180 is ok. Will that cylinder have some slightly worn rings sure but nothing serious. When you get into below 150's is when you will have some damage that will cause issues and will only get worse
Motor is fine and change that oil
Motor is fine and change that oil
