b16 rex.. burning oil like a bitch :(
so i picked up a head gasket.. some copper spray.. ordered a valve cover gasket too...
need to change all thease fuckers a.s.a.p will be picking up a tourque wrench aswell someone mind helping with tourque specs? how do i remove the head properly? any tips? any help would be appreciated the fucker is running on 2 cylinders because the middle 2 plugs are bad.. not going to change the plugs till i change the headgasket.. let me know ------, thanks |
Re: b16 lsd tranny rex runs!!!! now how the fuck do i change a head gasket??
Isn't there a link on here for downloadable manuals?
Ninja Edit: I can't even find the link... maybe I'm thinking of another forum??? |
Re: b16 lsd tranny rex runs!!!! now how the fuck do i change a head gasket??
well first you take off cam caps 12mm about 16 of them then there will be i beleave 8 headstuds 14mm remove them you may need a breaker bar dont use your tourqe wrench you may have to re-calibrate if you do. then there are some coolant lines in the back of the intake mani 1 on the head its also best to put the motor at tdc before you take it apart so you dont have to later then the pvc hose needs to come off ( hose on black box) it may be a bitch to pull the head off but it will come off unplug all injectors & fuel rail ect or better yet get a haynes manual then take a razor or steelscrub brush remove left over gasket and install on install be carefull of the dowel pins. ive never used copper spray so that is over my head.
|
Re: b16 lsd tranny rex runs!!!! now how the fuck do i change a head gasket??
http://www.clubcivicquebec.com/techLinks_f.php
Btw guys, we spell it "torque" not "tourqe" or "tourque" ;) |
Re: b16 lsd tranny rex runs!!!! now how the fuck do i change a head gasket??
ill change all gasket of my ZC DOHC next week ill do a how-to ;D, it isnt to hard really, just read manual of ur car and torque all by looking specs before do it correctly of course.
|
Re: b16 lsd tranny rex runs!!!! now how the fuck do i change a head gasket??
You may also want to take the head to the machinst to to get a quick mill to make sure you have a good sealing surface. Also I would recommend a heavy degreasing on the head to clean up ports/chambers vlaves etc.
|
Re: b16 lsd tranny rex runs!!!! now how the fuck do i change a head gasket??
not to be a dick , but you have over 5k post and you don't have a clue on changing a head gasket, nor own a torque wrench?
Okay here are my two cents. CYLINDER HEAD bolt torque order and specs 8, 4, 2, 6, 10 <---intake order 3, 7, 9, 5, 1 7, 3, 1, 5, 9 <---exhaust order 4, 8, 10, 6, 2 Torque in steps: 22ft-lbs (264in-lbs), Then to 63ft-lbs (756in-lbs) (final spec) 94+ Teg Torque in steps: 22ft-lbs (264in-lbs), Then to 61ft-lbs (732in-lbs)(final spec) 90-93 Teg / B16's |
Re: b16 lsd tranny rex runs!!!! now how the fuck do i fix the timing??
thanks i got that fucker almost done..
now i need help getting the timing straight :( any tips? i got the fucker at tdc and the 2 cams alligned but for some retarded reason theres a god awful ammount of slack on the belt between the 2 camshafts :( |
Re: timing problems! see post 8
I have always had a little slack between the two cams (Like about a half of a tooth) when ive done friends. After I get it all lined up and get the belt on, I spin the motor counter clockwise about 3 times with the tensioner kinda loose so it can suck up the slack of the belt. Then I line up my bottom pully on the tdc mark, and look at my cams. If they are still lined up than lock down the tensioner, put it together, and call it a day. then I Drink a bunch of beers. :D
|
Re: timing problems! see post 8
the 2 cams are 1 tooth off :(
http://www.t-mobilepictures.com/phot...9720l6d7ry2tpw lol ill try again in a little bit or tomorrow.. ratcityrex makes it sound alot easier then it is :( |
All times are GMT -5. The time now is 04:34 AM. |
© 2024 MH Sub I, LLC dba Internet Brands