.:: Automatic to Manual swap ::.
#1
.:: Automatic to Manual swap ::.
Hey HMT,
Im pretty new to this site but i really love how everyone helps each other around. Well with that said....
I have a 94 Honda Civic ex wich is automatic and i am going to do a conversion to manual. I bought the d16z6 transmission as well as an ACT clutch system. Before i planned this out i bought my friends 95 civic with a d15** tht came from washington. so we pretty much stripped that *****-sucka barebone and we are planning on using those parts for my 94 civic ex but i am wondering if there is going to be anything that im going to have to come across and interfere with my swap ?? any ideas?? i got everything from the other civic and im planning on putting it on my 94 ex but i unno if the 95 is a dx .. does it matter?? thx for the help.
- Adrian
Im pretty new to this site but i really love how everyone helps each other around. Well with that said....
I have a 94 Honda Civic ex wich is automatic and i am going to do a conversion to manual. I bought the d16z6 transmission as well as an ACT clutch system. Before i planned this out i bought my friends 95 civic with a d15** tht came from washington. so we pretty much stripped that *****-sucka barebone and we are planning on using those parts for my 94 civic ex but i am wondering if there is going to be anything that im going to have to come across and interfere with my swap ?? any ideas?? i got everything from the other civic and im planning on putting it on my 94 ex but i unno if the 95 is a dx .. does it matter?? thx for the help.
- Adrian
#3
#5
Re: .:: Automatic to Manual swap ::.
THIS IS WHAT I DID TO MY CAR....U ARE GOIN TO NEED THE AXLES AND TRANNY MOUNTS FROM THE STICK....AND THE ecu IS A MUST!....AND WHEN U INTALL THE LINES IT SHOULDNT BE TOO HARD SINCE THERE ARE CAPS THAT U JUST POP OFF TO GET THE STUFF THROUGH.....AND UR GOIN TO HAVE TO MAKE 2 HOLES ON YOUR FLOOR SO THE LINKAGE CAN BE BOLTED ON....AND BUY SOME DYNOMAT SO U CAN SEAL THE GIANT WHOLE THAT IS GOIN TO BE LEFT THERE.....AND GOOD LUCK WITH THE WIREING....B/C ITS GOIN TO SCREW WITH YOUR IGNITION.....(KEY WONT GO OUT AND SUCH)
#9
Re: .:: Automatic to Manual swap ::.
Originally Posted by 95_civic_lx
U ARE GOIN TO NEED THE AXLES
AND TRANNY MOUNTS FROM THE STICK
AND THE ecu IS A MUST!
AND GOOD LUCK WITH THE WIREING....B/C ITS GOIN TO SCREW WITH YOUR IGNITION
#10
Re: .:: Automatic to Manual swap ::.
Originally Posted by Cray91
Your old ones should be fine.
yes
Just modify the one you have now.
Just take your old shifter harness and solder the two fatest wires together. That will allow you to start the car. Then jumper two of the other wires together so you can get your key out. Not really hard at all.
yes
Just modify the one you have now.
Just take your old shifter harness and solder the two fatest wires together. That will allow you to start the car. Then jumper two of the other wires together so you can get your key out. Not really hard at all.