boosted_b16

how hard would it be to convert a 95 integra LS from auto to manual? is it worth it? worth the cost? I have a general idea of what it would take, let me know if i'm missing anything, and how much you think its gonna cost me to get these items. I appreciate the help guys...
heres the parts list I think I need, also I want to do it with a cable tranny, any issues anyone can think of with useing cable instead of hydro?
-cable manual tranny
-clutch assembly
-flywheel
-pedals from a manual
-clutch cable
-manual ecu
is there anything else? is there gonna be any real fab work involved? how much is this gonna cost? thanks again guys...

hondalowlow

its not that hard and i did my conversion in my EK in about 3 hours

i got intrgra pedal assy
stainless clutch lines
EX tranny mount
EG linkages
EG tranny
EG clutch/flywheel

and put it all in

then only thing i had to buy from honda was the 20.00 EX tranny mount "top one"

so get a LS passenger tranny mount and the lingakes and if u got everything on your list you should be good to go

you can re pin your ecu but on my EK i just left the tranny plug unplugged and it runs fine.

wire your reverse lights or put em on a switch that hidden " i had to do it for state inspection"

ichbinsobose

You need a manual tranny mount, look at my pictures in my siggy that I took during my swap. I listed most of the parts I used I think.