How to convert "Auto" P28 ECU to "Manual" ?
#1
How to convert "Auto" P28 ECU to "Manual" ?
Anybody know of a site that has pictures or at least instructions on how to change an "Auto" P28 ECU to a "Manual" P28 or vice versa? I remember seeing it a very long time ago. I think you only need to remove or add a few resistors or capacitors or something. Help if you can.
#2
Re:How to convert "Auto" P28 ECU to "Manual" ?
Below the PROM silkscreen you remove RP17 and RP18, then jumper RP18. Chip the ECU with a manual program.
Some of the tuner programs out there don't even need the RP17 and RP18 fiddled... but every so often you get a software/hardware quirk with a new program and it starts kicking code 19s for the auto tranny lockup, etc.
Some of the tuner programs out there don't even need the RP17 and RP18 fiddled... but every so often you get a software/hardware quirk with a new program and it starts kicking code 19s for the auto tranny lockup, etc.
Thread
Thread Starter
Forum
Replies
Last Post
BoostedBSeries
Turbo Parts For Sale
4
01-04-2004 01:54 PM