auto to manual?
how hard would it be to convert a 95 integra LS from auto to manual? is it worth it? worth the cost? I have a general idea of what it would take, let me know if i'm missing anything, and how much you think its gonna cost me to get these items. I appreciate the help guys...
heres the parts list I think I need, also I want to do it with a cable tranny, any issues anyone can think of with useing cable instead of hydro? -cable manual tranny -clutch assembly -flywheel -pedals from a manual -clutch cable -manual ecu is there anything else? is there gonna be any real fab work involved? how much is this gonna cost? thanks again guys... |
Re: auto to manual?
its not that hard and i did my conversion in my EK in about 3 hours
i got intrgra pedal assy stainless clutch lines EX tranny mount EG linkages EG tranny EG clutch/flywheel and put it all in then only thing i had to buy from honda was the 20.00 EX tranny mount "top one" so get a LS passenger tranny mount and the lingakes and if u got everything on your list you should be good to go you can re pin your ecu but on my EK i just left the tranny plug unplugged and it runs fine. wire your reverse lights or put em on a switch that hidden " i had to do it for state inspection" |
Re: auto to manual?
You need a manual tranny mount, look at my pictures in my siggy that I took during my swap. I listed most of the parts I used I think.
|
All times are GMT -5. The time now is 05:44 PM. |
© 2024 MH Sub I, LLC dba Internet Brands