86 crx which swap do I use?
11-04-2003, 01:50 PM
#1
0.5 BAR
Thread Starter
Join Date: Aug 2003
Posts: 187
86 crx which swap do I use?
I am about to pick up a 86 CRX with a blown motor and I was wondering what would be the easiest swap besides the same carb motor I want some FI. I was considering the ZC i heard it is an easy swap but is it true I have to swap hubs with an older CRX or teg and fuel tank crap like that what about a D16z6 would I have to swap hubs. Whats the difference in the Brown top ZC and the Silver. Open to some suggestions also have a almost complete turbo kit you know I'm going to throw that bad boy on. Any help would be appreciated.
11-07-2003, 09:33 AM
#3
0.0 BAR
Join Date: Jan 2003
Posts: 35
Re:86 crx which swap do I use?
i think the d16a1 is the best swap its so damn easy you just need the integ tranny/ecu/axles for it. you have to kinda shave down the one mount on the left side b/c of the timing cover but not too much. basically grab everything you can from an integ
01-02-2004, 01:30 PM
#4
0.0 BAR
Join Date: Jan 2004
Posts: 11
Re:86 crx which swap do I use?
the best swap for your crx would be the b16a1 and yes its possible. ive seen an 87 civic si wit an b16a1 running low 14's. i think thats a satisfying et. b16a1 are also cheap and they're a lot better then zc's and d16z6
Thread
Thread Starter
Forum
Replies
Last Post
b18vtecrx
Turbo Parts For Sale
0
09-01-2004 01:41 AM
