b16a swap....which axles do i use
11-04-2003, 11:04 PM
#1
0.0 BAR
Thread Starter
Join Date: Aug 2003
Posts: 29
b16a swap....which axles do i use
im thinking about doing a b16a swap in a 2nd gen crx. my question is, can i use the stock axles that came with the crx for the swap. or should i just get the complete change over package from hmotors.com?
11-05-2003, 12:55 AM
#2
!! UNCONFIRMED EMAIL !!
Join Date: Dec 2002
Posts: 6,656
Re:b16a swap....which axles do i use
there are many awnsers to this. the short anwser is 90-93 Integra axles. but you should do some research: http://www.hasport.com/...
11-10-2003, 10:02 PM
#4
3.0 BAR
Join Date: Jan 2003
Posts: 7,082
Re:b16a swap....which axles do i use
or if you're lucky like me you get a genuine SiR motor with transmission and you get to do some custom axles (I got mine from raxles)
do a google search for "truth about axles" and click on the hasport page that comes up, it's got some good information. If you have some money check what transmission comes with the motor and then call up raxles and they'll get you some axles that fit very nicely.
do a google search for "truth about axles" and click on the hasport page that comes up, it's got some good information. If you have some money check what transmission comes with the motor and then call up raxles and they'll get you some axles that fit very nicely.
11-11-2003, 06:01 PM
#6
!! UNCONFIRMED EMAIL !!
Join Date: Dec 2002
Posts: 6,656
Re:b16a swap....which axles do i use
they work fine cuz you have an Integra (XSi, LS, GS, whatever there the same) intermide shaft. the SiR shaft is a different legnth (shorter) and if you use the teg axles they can pop out or just break so much easier... its all explained on Hasports website...
Thread
Thread Starter
Forum
Replies
Last Post
