86 crx which swap do I use?
 

I am about to pick up a 86 CRX with a blown motor and I was wondering what would be the easiest swap besides the same carb motor I want some FI. I was considering the ZC i heard it is an easy swap but is it true I have to swap hubs with an older CRX or teg and fuel tank crap like that what about a D16z6 would I have to swap hubs. Whats the difference in the Brown top ZC and the Silver. Open to some suggestions also have a almost complete turbo kit you know I'm going to throw that bad boy on. Any help would be appreciated.

Re:86 crx which swap do I use?
 

The d16z6 will not bolt in. THe best bet is a ZC or a usdm d16a1. I do believe you need to use the teg tranny and axles for that swap.

I would check out redpepperracing.com

they are the 1g gurus

Re:86 crx which swap do I use?
 

i think the d16a1 is the best swap its so damn easy you just need the integ tranny/ecu/axles for it. you have to kinda shave down the one mount on the left side b/c of the timing cover but not too much. basically grab everything you can from an integ

Re:86 crx which swap do I use?
 

the best swap for your crx would be the b16a1 and yes its possible. ive seen an 87 civic si wit an b16a1 running low 14's. i think thats a satisfying et. b16a1 are also cheap and they're a lot better then zc's and d16z6

Re:86 crx which swap do I use?
 

i'd do a turbo A1 those motors are retardedly cheap and easy to come by and the swap is easy.