can anyone who has used the Motorola 2.5bar map sensor give me some insight as to what wires go where in relation to the stock map sensor on OBD1 car.

thanks.

 

Download the spec sheet...it tells you. 3 pins you use (1-3) and the other 3 are internal...snip them off or cover them.

Pin 1 is the one with a notch in it

 

motorola makes map sensors?

how many ring tones does that come with?

this look familiar at all?

MAP - HARNESS 3SI Updated color codes from RDMellon - Thanks!
-----------------------------------------------
+5V - TPS Connector (Green/Yellow)
Ground - EGTR Connector (A22 - Black)
Signal - EGTR Connector (A22 - Light Green/Black)

 

Ah...now you've gone and made me do work.

Pin 1 to REF
Pin 2 to GND
Pin 3 to 5v

 

thanks i appreciate it!

****, you still comming to my neck of the woods this summer?

 

yeah im still trying to get some dates lined up but I wanna do a weekend trip soon. i got a friend who needs some help working on ---- on his all-trac