|
Re: your threads suck, so help me make a gasket
Originally Posted by 90CRXSiR
using a belt sander could just be agrevatiing a leak. not knowing if its truely flat and not knowing how much youre grinding down could be bad.
Originally Posted by AWDstylez
$2,000 says you don't get your manifolds from where he (and I) gets his manifolds and you also don't realize that his par factor > your par factor.
|
Re: your threads suck, so help me make a gasket
Originally Posted by Joseph Davis
You've obviously never tried it. I use belt sanders on cylinder heads to short to fit on my machinist's rotary broach - smaller V6 and Metro heads, check with a straight edge, perfection.
Seeing as how I build my own personal manifolds, you are correct. However, seeing as how I touch more cars than your manifold builder makes manifolds for I'm going to stick with what I know works fine. Thanks for playing, though. Hemroids? BELT SAND THAT ----! |
Re: your threads suck, so help me make a gasket
belt sanders of the large type make great decking tools for heads and blocks
|
Re: your threads suck, so help me make a gasket
Originally Posted by Joseph Davis
Seeing as how I build my own personal manifolds, you are correct. However, seeing as how I touch more cars than your manifold builder makes manifolds for I'm going to stick with what I know works fine. Thanks for playing, though.
|
Re: your threads suck, so help me make a gasket
who was it that made the gasket out of a soda can. that ---- was dope.
awdstyles is a faggot also |
Re: your threads suck, so help me make a gasket
Originally Posted by 90boostdaccord
who was it that made the gasket out of a soda can. that ---- was dope.
awdstyles is a faggot also and yes belt sand- two bored out factory gaskets-copper spray FTW !!!!!!!!! |
Re: your threads suck, so help me make a gasket
i made a turbo gasket out of .06" aluminum and it works awesome. no signs of a leak at all
|
Re: your threads suck, so help me make a gasket
Originally Posted by AWDstylez
I never said you didn't know more or that it wouldn't work for you. I simply said I would be willing to put money on HIS particular manifold leaking if he tried to run no gasket.
Originally Posted by 90boostdaccord
awdstyles is a faggot also
|
Re: your threads suck, so help me make a gasket
Originally Posted by AWDstylez
I never said you didn't know more or that it wouldn't work for you. I simply said I would be willing to put money on HIS particular manifold leaking if he tried to run no gasket.
|
Re: your threads suck, so help me make a gasket
AWDstyles is probably thinking about a belt sander like this:
http://content.answers.com/main/cont...nder_bosch.jpg Whereas JD probably means one like this: http://www.automatictransmission.com...40Extreme3.jpg |
| All times are GMT -5. The time now is 01:15 AM. |
© 2024 MH Sub I, LLC dba Internet Brands