Wastegate problem
Thread Starter
0.0 BAR
Joined: Mar 2007
Posts: 2
Wastegate problem
I brought thie external wastegate HKS style 40mm w/ adjustable boost control . There is an adjustment screw that is supposed to be in the middle that is missing, to adjust when the WG is to open and
The port beside is for advanced boost control, usually for people using CO2 to control boost. Can I just plug the hole for the boost control , if I didn't want to use one. And is it safe to plug the screw hole or do I need to buy a new wastegate. (bought off ebay
)Here is a pic 
The port beside is for advanced boost control, usually for people using CO2 to control boost. Can I just plug the hole for the boost control , if I didn't want to use one. And is it safe to plug the screw hole or do I need to buy a new wastegate. (bought off ebay
)Here is a pic 
?
3.0 BAR
Joined: Oct 2004
Posts: 1,810
Re: Wastegate problem
40mill .. how many psi are you gona run?
look man its simple
8mill=38psi
so.....40mill=40psi
make shure you run a fmu thats all I can say
And no you can't just plug the screw hole it will burn your turbo, you have to buy a new one now
good luck!
look man its simple
8mill=38psiso.....40mill=40psi
make shure you run a fmu thats all I can say
And no you can't just plug the screw hole it will burn your turbo, you have to buy a new one now
good luck!
Thread
Thread Starter
Forum
Replies
Last Post
ILoveTitties
Forced Induction
11
Jun 11, 2005 03:29 AM
titansvolz
Hybrid/Tech
4
May 10, 2005 12:11 PM
96DXHatchBlack
Forced Induction
8
Oct 16, 2004 09:51 AM
