washers between wastegate and compresser housing
Thread Starter
0.0 BAR
Joined: Apr 2005
Posts: 16
washers between wastegate and compresser housing
If you put washers between the wastegate and spoolside of the turbo will that essentially do the same thing as lengthening the rod? Making the wastegate open sooner. I got two longer 10mm bolts and some thin washers and put them between wastegate mount and the compresser housing. If anyone has tried it let me know. I'm waiting on my ecu to get back to try it so see what the boost does. I'll see what happens but if others have tried it chime in.
3.0 BAR
Joined: Mar 2003
Posts: 21,468
Re: washers between wastegate and compresser housing
If it brings the actuator closer to the wastegate it will lower the boost. The only problem is you will lose spool time. 
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
1.0 BAR
Joined: Sep 2004
Posts: 348
Re: washers between wastegate and compresser housing
i did it then i realized i had an adjustable WG so i just turned it , then i made a MBC and its the ---- 12$ at homedepot!!! 
but yea it does work but i put like 4 washers on each bolt it made it quicker off the line but faded at high rpm :P
but yea it does work but i put like 4 washers on each bolt it made it quicker off the line but faded at high rpm :P
Thread
Thread Starter
Forum
Replies
Last Post
krskid
Wanted
6
Aug 2, 2004 08:18 PM
