Using internal AND external wastegate?
#11
Re:Using internal AND external wastegate?
Originally Posted by GPoodle
I have a deltagate wastegate, and I took it all apart and cleaned it out last night but Ive read that a lot of people have problems with boost spikes when useing it. I was wondering, if the turbo is internally wastegated, if I make my manifold to support an external wastegate like the Deltagate, could I use both? I thinking is that if the external WG spikes, the internal one on the turbo should vent that spike assuming both are set to the same PSI.
Is this logical or have other people done this?
Thanks.
Is this logical or have other people done this?
Thanks.
1. Improper placement - the wastegate should be placed as close as possible to the turbo outlet flange - like at a collector.
2. with a T-3 or similar turbo the hole where the internal wastegate flapper was engineered...isn't normaly used.
this is the best setup if you can't center the wastegate.
plus this way you have a larger overall outlet for the downpipe. It is over 3" with wastegate open!
Thread
Thread Starter
Forum
Replies
Last Post
djay86
Forced Induction
10
11-26-2005 03:56 PM