I realize there is a sticky on this, and ive tried all the tips and this thing will still not budge at all. Ive managed to get all the bolts on the turbine housing loose, but no matter what I use to dislodge the housing from the center section (penetrating lubricant) and liberal hammer use, I can not get that thing loose. The oil drain would be at a 45 deg (maybe less) angle from pointing straight down. Im not sure if I try it where its at now if oil will back up. Turbo is a t3 w/ .42/.48 ar from a volvo or saab. Yea its a small turbo (2.4L 4g64) but ill be ordering a turbo coupe compressor housing eventually. any advice would be very much appriciated.

Tom