i just put a motor in my eg i took it out for a test run on the way back i git a nasty pot hole then the car stop moving i would throw it in gear and try to move off but it wont move at all i dont know why could it be the shafts and i would start the car and throw it in gear and it wont grind with out holda the clutch dont i need to know whats wrong please help asap

 

one of your axle came off.


edit: it could be both axle if u didn`t know how to make them snug.

 

U gotta check the axle(s) if it's out. I think it might be ur passenger side axle, so check that first. If u have the car on an push the axle in a little and u hear a grind then ur axle popped out.

 

put it in gear and let the clutch out....does the speedo move but car doesn't? then its the drive shaft
you need to put a piece of wood on the end and tap it in till you hear a "click" when you hear it you will know what i mean

 

when i get in the car and try to drive it it makes a noise but the shaft won't spin

 

what shaft, the axle?
it`s not goin to spin if it is not seated.
the opposite side axle will not spin if the other side is out.