T-25 turbo project fail *VID*
10-21-2008, 02:34 AM
#122
1.5 BAR
Join Date: Mar 2005
Posts: 723
Re: T-25 turbo project fail *VID*
You do have decent NGk plugs, heatrange 7, gapped to ~.030" or less, right? You should experament with much less timing, say 1.25* per psi. Crome Gold has different timing than Crome Pro due to no stock correction being active anymore.
Sounds like it could also be some weird vtec-map issue. 1st time I ran my car with Uberdata many moons ago, somehow it didn't change the normal timing map, but did with vtec. Out of vtec = ~2psi boost cut (-6deg timing in boost!), vtec = -1* per psi. So I hade some HELLA MAD VT@K going. :1
Sounds like it could also be some weird vtec-map issue. 1st time I ran my car with Uberdata many moons ago, somehow it didn't change the normal timing map, but did with vtec. Out of vtec = ~2psi boost cut (-6deg timing in boost!), vtec = -1* per psi. So I hade some HELLA MAD VT@K going. :1
though not as bad..
Thread
Thread Starter
Forum
Replies
Last Post
turboRunner
Forced Induction
6
03-10-2012 06:58 AM
TurboG
General Discussion
59
08-19-2008 02:41 PM
