socket for oil feed install
08-31-2005, 08:15 PM
#12
1.5 BAR
Thread Starter
Join Date: Jul 2005
Posts: 941
Re: socket for oil feed install
i didnt have enuf space to fit up a 15/16 socket and socket wrench, so i went out and bought just a plain old wrench, and that worked amazingly well
Now, i have another oil feed question...if i tigheten the turbo fitting all the way down, it faces the flange, thus not allowing me to attach the oil line, is it ok if it is a bit loose, and i use tewflon paste?
Now, i have another oil feed question...if i tigheten the turbo fitting all the way down, it faces the flange, thus not allowing me to attach the oil line, is it ok if it is a bit loose, and i use tewflon paste?
08-31-2005, 08:21 PM
#13
Guest
Posts: n/a
Re: socket for oil feed install
Originally Posted by cberman
i didnt have enuf space to fit up a 15/16 socket and socket wrench, so i went out and bought just a plain old wrench, and that worked amazingly well
Now, i have another oil feed question...if i tigheten the turbo fitting all the way down, it faces the flange, thus not allowing me to attach the oil line, is it ok if it is a bit loose, and i use tewflon paste?
Now, i have another oil feed question...if i tigheten the turbo fitting all the way down, it faces the flange, thus not allowing me to attach the oil line, is it ok if it is a bit loose, and i use tewflon paste?
Thread
Thread Starter
Forum
Replies
Last Post
5speed4life
Engine Management
5
05-24-2005 03:11 AM
HMT-Admin
Forced Induction
7
12-13-2003 02:10 AM
