socket for oil feed install
 

Any one remember what size deep socket is used for the stock sensor, where the oil feed goes to on a d16y8...all i kno is that (1) i dont have a big enuf socket, and my larges is 19mm i believe

Re: socket for oil feed install
 

nvm...found it on h-t

23mm deep socket

Re: socket for oil feed install
 

I was going to say 15/16ths, but yeah, Japanese == Metric. :)

Re: socket for oil feed install
 

Vice Grips/Channel Locks pwn all

Re: socket for oil feed install
 

Re: socket for oil feed install
 

i have a socket just for that. 24mm deep socket.

Re: socket for oil feed install
 

that is the hardest way ever... i'd kill my self if i couldn't jus use a deep socket.

Re: socket for oil feed install
 

It worked perfectly and was very easy for me.

Re: socket for oil feed install
 

man... on a b series with the oil filter/mount/knock sensor in the way i think ill be stickin to the deep socket. easier then takin a piss without holdin on... man i miss my honda and all of its problems haha

Re: socket for oil feed install
 

24mm open end wrench