rad in 90 hatch w B16
#1
rad in 90 hatch w B16
Hey guys can you tell me if the Rad will work in my car... 90 civic hatch w B16 Turbo in it...??
http://cgi.ebay.com/ebaymotors/ws/eB...category=33602
http://cgi.ebay.com/ebaymotors/ws/eB...category=33602
#5
Re:rad in 90 hatch w B16
im running a half size rad in my 91 hatch w/ a turbo charged b16. i kept the stock rad. support,and front cross member. i just tilted mine forward and put a slimline fan infront of in. i put a couple layers of rubber on the bottom and used a zip tie to secure it down thier,and fabricated a couple of upper suports out of two pieces of small round metal. turned out pritty good,and it dosent move around.
#8
Re:rad in 90 hatch w B16
They are not going to melt unless you have the exhaust blowing right on the radiator, but it should be fine.
I used integra hoses on my b-series swap, the d series hoses are a little small for the fittings on the block.
I used integra hoses on my b-series swap, the d series hoses are a little small for the fittings on the block.
Thread
Thread Starter
Forum
Replies
Last Post