rad in 90 hatch w B16
 

Hey guys can you tell me if the Rad will work in my car... 90 civic hatch w B16 Turbo in it...??

http://cgi.ebay.com/ebaymotors/ws/eB...category=33602

Re:rad in 90 hatch w B16
 

that's a helluva good deal. buy it quick, it'll work. i have the same radiator from factory and my car's boosted no problems at all. it runs at the same temperature it ran at w/o turbo.

Re:rad in 90 hatch w B16
 

im worried about fitment and if itll work with the vtec motor...??

Re:rad in 90 hatch w B16
 

https://www.homemadeturbo.com/turbo/tt/tt36.jpg
Jeff is using a half radiator on twin setup

So, yes it will work with a b series vtec motor.

I have mounted a half rad before in my civic. You just need to fabricate a way to secure it.

Re:rad in 90 hatch w B16
 

im running a half size rad in my 91 hatch w/ a turbo charged b16. i kept the stock rad. support,and front cross member. i just tilted mine forward and put a slimline fan infront of in. i put a couple layers of rubber on the bottom and used a zip tie to secure it down thier,and fabricated a couple of upper suports out of two pieces of small round metal. turned out pritty good,and it dosent move around.

Re:rad in 90 hatch w B16
 

Thanx guys for all your help... this thread can be deleted... thanx again

Re:rad in 90 hatch w B16
 

Another Question... Will the plastic end tanks melt or anything with the turbo in there??? and also will the b16 rad hoses fit the 92-95 rad?? Thanx...

Re:rad in 90 hatch w B16
 

They are not going to melt unless you have the exhaust blowing right on the radiator, but it should be fine.

I used integra hoses on my b-series swap, the d series hoses are a little small for the fittings on the block.

Re:rad in 90 hatch w B16
 

Well right now my b16 hoses are hooked up to my stock civic rad so i should be alright then huh?

Thanx AbaZ.

Re:rad in 90 hatch w B16
 

I had a half rad and I couldn't get it to fit in the car without building a new front crossmember