problem with sleathmode 450cc injectors
#11
Re: problem with sleathmode 450cc injectors
Fuel management is the problem, if you are running the CorrectInject450s with only the stock management. In addition to the Uberdata solution, you can use an SMC from ZipTech for around $119. We are using one of those on our daily driver, and it has done great for over a year now. BTW it's a non-boosted car, running CorrectInject450s, using the SMC to pinch them back to stock levels.
Craig
Craig
#12
Re: problem with sleathmode 450cc injectors
i was issued the first set of correct inject 550s from craig a long time ago, 2 cars later and about a ---- ton of miles, they are awesome... the injectors are not the problem here its user error,
craig thanks again for the injectors
craig thanks again for the injectors
#14
Re: problem with sleathmode 450cc injectors
Originally Posted by TunerToys
HotSex,
We just added 660s to the product line up, so we are ready for you when you move up again.
Craig
We just added 660s to the product line up, so we are ready for you when you move up again.
Craig
hello
I have a question about the injectors, so I just have to buy a SMC to make the 450cc correctinjectors to work and nothing else right?
#15
Re: problem with sleathmode 450cc injectors
That's about it. We are running a 89 Rex Si (D16A6) with everything stock. Stock Fuel Pump, lines, etc. No Boost, no turbo, no nothing. We have added the CorrectInject 450s to it, and the SMC500 running at -50% across the RPM range. The car runs like stock. We will continue to run it this way until we boost it, at which time we'll adjust the SMC for less and less correction as the boost builds up, allowing the 450s to open up and supply the needed extra fuel for boost.
You can get them here...
http://userwww.sfsu.edu/~ecg/
You can get them here...
http://userwww.sfsu.edu/~ecg/
Thread
Thread Starter
Forum
Replies
Last Post
bambbrose
Turbo Parts For Sale
6
07-09-2006 01:29 PM
96DXHatchBlack
Forced Induction
8
10-16-2004 09:51 AM
Chris Harris
Turbo Parts For Sale
2
09-08-2004 01:31 PM