problem with sleathmode 450cc injectors
 

hello

I was putting them on my 96 dx obd2 turbo civic and those sleathmode injectors wouldn't start my car unless you push the gas ,but if you let go the gas the engine will cut off. also I checked the resistance on those sleathmode injectors it is the same as my stock injectors ,which is 11.5 ohms. I also did wired up the clips. well I have no luck with those injectors and Please leave me some suggestion.


thanks for looking.

Re: problem with sleathmode 450cc injectors
 

you do have something controlling them right? like an afc or uberdata or something

Re: problem with sleathmode 450cc injectors
 

Haha, I'm interested in knowing what your using to control those injectors? If your just running the stock OBD2 ecu with no piggyback or anything, your running waaaay too much fuel and that would be your reason for it not running right. You need something to scale those 450's down.

Re: problem with sleathmode 450cc injectors
 

Oh my this will get interesting!

Re: problem with sleathmode 450cc injectors
 

well I thought in the sleathmode injectors page said that it's going to run fine with stock fuel system

Re: problem with sleathmode 450cc injectors
 

yea as in stock fuel pump, lines, etc....you still need something to control them

Re: problem with sleathmode 450cc injectors
 

well what do you sugguest . safc???

Re: problem with sleathmode 450cc injectors
 

best cheap option: swap to obd1 and use uberdata

Re: problem with sleathmode 450cc injectors
 

The man said it himself. ;) You might need a new set of plugs now too, but no big deal.

Re: problem with sleathmode 450cc injectors
 

It just wouldn't be fun if fuel management was that easy. Go read in the Engine management forum's FAQ and you'll see the options you have for fuel management