ok, so i bought the rebuild kit.
#1
ok, so i bought the rebuild kit.
stupid mistubishi crap god damn motherfu........
i mean, anyways i bought the rebuild kit for my turbo, MHI TE04H, and i go and pick it up and it's in this little tiny box like a matchbox, so i'm thinking "$250 FOR THIS!?! WHAT THE ----?" so i ask the lady "are there instructions included?" and she goes "no, you've never done this before?, you know there is quite a learning curve. how are you planning to clean it? do you have some way of cleaning it?"
and on and on, anyways, she made me real nervous about rebuilding it myself, so i asked her how much to have them do it, "$260"
well for ---- sakes, that's $500 down the drain if i get them to do it.
so what i'm asking is, does anyone wanna come help me? or um send me instructions, i saw the one in the faq i think, but there were dead pictures or something.
i mean, anyways i bought the rebuild kit for my turbo, MHI TE04H, and i go and pick it up and it's in this little tiny box like a matchbox, so i'm thinking "$250 FOR THIS!?! WHAT THE ----?" so i ask the lady "are there instructions included?" and she goes "no, you've never done this before?, you know there is quite a learning curve. how are you planning to clean it? do you have some way of cleaning it?"
and on and on, anyways, she made me real nervous about rebuilding it myself, so i asked her how much to have them do it, "$260"
well for ---- sakes, that's $500 down the drain if i get them to do it.
so what i'm asking is, does anyone wanna come help me? or um send me instructions, i saw the one in the faq i think, but there were dead pictures or something.
#3
Re:ok, so i bought the rebuild kit.
seals and bearings and a whole bunch of ----.
new nuts, washers, cerclips, bearings, more bearings, a bunch of ---- that i don't know what it is.
that's $250 canadian. for a TE04H. it's the best price i could find, plus it was overnighted.
new nuts, washers, cerclips, bearings, more bearings, a bunch of ---- that i don't know what it is.
that's $250 canadian. for a TE04H. it's the best price i could find, plus it was overnighted.
#4
Re:ok, so i bought the rebuild kit.
http://www.vfaq.com/mods/Turbo-rebuild.html
http://turbofiero.fierojoe.com/rebuilding.htm
thats just from typing how to rebuild a turbo in google
http://turbofiero.fierojoe.com/rebuilding.htm
thats just from typing how to rebuild a turbo in google
#6
Re:ok, so i bought the rebuild kit.
shortyz can prolly help you, hey what do you know, he's north of the border too how many canadians does it take to rebuild a turbo?? (i have a feeling we'll be waiting a while for the answer )
#7
Re:ok, so i bought the rebuild kit.
i just took mine to bits for a laugh, there is't really much to them. Get yourself a half decent work area, you'll need a vice and probly some gas bottles for the hard to remove bolts then strip it and lay it out systematically, clean and put back together replacing the old ---- with the new. Are you planning on getting it re-balanced? although i think this is somewhere in the FAQ!
#8
Re:ok, so i bought the rebuild kit.
i took mine apart and it is very strightforward. Make sure you mark it and When you pull the nut of the shaft, be sure to not put any lateral pressure on it. My turbo looked rather clean inside but it still had a lot of lateral shaftplay and i think thats what made it smoke.
#9
Re:ok, so i bought the rebuild kit.
yes just read this several times before you start. Teo4h is very simular inside.
http://www.vfaq.com/mods/Turbo-rebuild.html
http://www.vfaq.com/mods/Turbo-rebuild.html
Thread
Thread Starter
Forum
Replies
Last Post
jackhunt321
Forced Induction
20
09-19-2005 10:03 PM
TurboBoostedEK
Forced Induction
23
07-26-2005 02:01 PM
coreyhayman
Forced Induction
5
05-24-2004 05:46 PM