coreyhayman

iv got a dohc zc motor and just recently picked up a homemade kit for my car for cheap. This is what iv got with the kit i bought.......

Hf manifold
adapter plate
turbo from a jdm mazda mpv
filter
oil lines wtih fitting
coolant lines
tapped oil pan
Fmu
intercooler
passat bov
msd blaster coil 2 with cap

what else would i need to run thid set up on my car?....he said for fuel management he was just using h22 injectors and the fmu.....and his car with the sme motor as mine ran a 13.9 untuned at 11psi.....could i just get some dsm injectors and wire them up or what?......basically i need help on what to sue for management the cheap way......thx in advance

Carnesd

sell the fmu on ebay and get some 450's and run turboedit

look in the classifieds and read the faq

quadnie

^^ what he said.

if you bought a kit from someone, shouldn't they be offering support for yer ***? Where did the kit come from?

street_kings

that FMU idea is insane. the prelude injectors are only 290 or 340cc injectors. At 11 PSI, with FMU and lude injectors be prepared to grenade your engine sooner or later211.

coreyhayman

well iv got new plans now, im gonna run a s-afc with 450 dsm injectors...would this b good for management?

street_kings

What ECU are you running? Uberdata/TE all the way mang