Oil PSI correct....now I have hesitation and stalling

Reply Subscribe

Thread Tools

Search this Thread

07-02-2003, 12:01 PM

#11

shortyz

3.0 BAR

Join Date: Dec 2002

Posts: 3,396

Re:Oil PSI correct....now I have hesitation and stalling

oil leaking from the turbo wouldnt cause an erractic idle.

07-02-2003, 12:13 PM

#12

88crxSi

3.0 BAR

Join Date: Feb 2003

Posts: 9,089

Re:Oil PSI correct....now I have hesitation and stalling

Quote:

Originally Posted by bmxunderground

I have been working for days to get the oil PSI's within a good operating range..Finally I got it dialed in but.....another problem has popped up.

Also, we have an oil leak from around the exhaust side of the turbo. White smoke from the tail. Could the O2 sensor be an issue?

Try here, same problem w/ the oil comin out of exhuast housing and tail pipe...
https://www.homemadeturbo.com/forum/...;threadid=5613

Fix = larger oil drain tube INSIDE DIAMETER. (1/2" MIN)

07-02-2003, 09:22 PM

#13

bmxunderground

0.0 BAR

Thread Starter

Join Date: Mar 2003

Posts: 44

Re:Oil PSI correct....now I have hesitation and stalling

the ID of our drain is 1/2inch...we have the -10an connectors. It doesn't come back up at all either..but it does have an elbow in.

I believe that the turbo has a leak at the seal...too bad or us because the turbo was new...

now we have a VERY ROUGH idle.

I will be testing it and getting back to you all...

Let me know if you all have experienced any problems with idle....fuel problems, or anything else.

Get back to me..