chiman72

Guys I need help! I was installing a turbo system n my buddies 96 civic ex. Exact turbo it T25 with stainless mani and DP. We got everything together tightened down and ready to rock. Initial start up was ok but then we noticed a slight leak from the oil-feed on the turbo. We then diassembled and found an *** load of oil in the inter cooler pipes. and in the DP, can you say White smoke everywhere. Why could this be? It's a new turbo and all.

accordepicenter

check your oil drain line, make sure its not plugged and should point down. What size is your oil feed line? If its too big youll dump way too much oil into that turbo

chiman72

The oil feed is a standairs steel braided line like the one with stealth mode kits and the oil drain pionts straight down. Could there be to much pressure?

4g63t_EGMonster

on a stock motor? there shouldn't be too much pressure. check your turbo and make everything is tight no loose seals.

chiman72

We opened the turbo up and the compressor wheel seemed fine but there was a ring at the back that was loose and wobbly. I dont have a clue

4g63t_EGMonster

is it between the compressor and the exaust housing? cause you dont want that one loose. technicaly there should be no loose seals

chiman72

well then turbo is fucked! thats what he gets for buying SSautoCrap!