Forced Induction Custom FI Setup Questions

my 1st kit

Thread Tools
 
Search this Thread
 
Old 01-29-2005, 03:47 AM
  #1  
0.0 BAR
Thread Starter
 
boosted89si's Avatar
 
Join Date: Jan 2005
Posts: 29
Default my 1st kit

i officaly have started my parts search for my first turbo kit. heres what i am workin wtih. i got a 89crx si. with a b16a1 swap. im lookin to make a sleeper kit by using a side mount or a small front mount. hp goals are like 350 range tuned on hondata. i like to go with a straight t3 or a t3/t4 if i can get a good priced one. lookin to make boost alway to redline. lookin to spend like 1.5k up to 2k. anyone got any good set ups i should base mine off of. and i have read the newbe part bout turbos. thanks everyone
boosted89si is offline  
Old 01-29-2005, 09:39 AM
  #2  
0.5 BAR
 
chu77's Avatar
 
Join Date: Jan 2005
Posts: 83
Default Re:my 1st kit

if ur running psi more than 8 u should get a front mount IC
and don't foret to built up the block and rods and ----
chu77 is offline  
Old 01-29-2005, 10:03 AM
  #4  
1.0 BAR
 
sohc_mshue's Avatar
 
Join Date: Apr 2003
Posts: 467
Default Re:my 1st kit

your probably gonna need to spend more than 1.5-2k and that sidemount isn't gonna be good at all for 350whp.
sohc_mshue is offline  
Old 01-29-2005, 11:01 AM
  #5  
3.0 BAR
 
djfob's Avatar
 
Join Date: Dec 2003
Posts: 3,092
Default Re:my 1st kit

After all that reading you're still running hondata? You need uberdata. The money saved can go elsewhere since making 350 whp is going to cost more than 1.5-2k.
djfob is offline  
Old 01-29-2005, 02:05 PM
  #6  
0.0 BAR
Thread Starter
 
boosted89si's Avatar
 
Join Date: Jan 2005
Posts: 29
Default Re:my 1st kit

i meant 350hp after i have motor built. i am just lookin for 275range on like 7 to 10psi
boosted89si is offline  
Old 01-29-2005, 03:55 PM
  #7  
1.0 BAR
 
95civic's Avatar
 
Join Date: Nov 2003
Posts: 471
Default Re:my 1st kit

You should focus more on just building a kit to boost a little and get used to it first unless you have been boosted before and understamd turboing.For sure you will need a fmic,dont like it showing?paint it black or use a grill
95civic is offline  
Old 01-29-2005, 07:58 PM
  #8  
KFB
0.5 BAR
 
KFB's Avatar
 
Join Date: Feb 2004
Posts: 139
Default Re:my 1st kit

you should read & learn and set realistic goals before you go talking about a 375hp turbo b16a with sidemount IC that cost you under 2k.
"With great power comes great responsibility."
-Old Dude in Spiderman movie
KFB is offline  
Old 01-29-2005, 08:15 PM
  #9  
con
0.0 BAR
 
con's Avatar
 
Join Date: Nov 2003
Posts: 0
Default Re:my 1st kit

Originally Posted by boosted89si
i officaly have started my parts search for my first turbo kit. heres what i am workin wtih. i got a 89crx si. with a b16a1 swap. im lookin to make a sleeper kit by using a side mount or a small front mount. hp goals are like 350 range tuned on hondata. i like to go with a straight t3 or a t3/t4 if i can get a good priced one. lookin to make boost alway to redline. lookin to spend like 1.5k up to 2k. anyone got any good set ups i should base mine off of. and i have read the newbe part bout turbos. thanks everyone
you should start with a d series there cheaper to "cut your teeth on"
con is offline  
Old 01-29-2005, 09:55 PM
  #10  
0.0 BAR
Thread Starter
 
boosted89si's Avatar
 
Join Date: Jan 2005
Posts: 29
Default Re:my 1st kit

i been boosted before. just this is my frist build up myself building a kit. reason i didnt go d series is my crx was all ready had ls motor in it before i bought it. i alrdy had the b16 swap so i figure i put the b16 in. i dotn have it all wired up yet cuz i wanted to bring it out turbo. as for money wise i not cheap i just like to be smart shoper. n when u set a goal for as in spending 1.5k to 2k u know u are goign to go over. so i not worryed bout it cuz i not goign to buy crap parts. n 375 hp i dont think is a goal that is out of reach once build the motor to run high boost. even if i only get 250 at teh wheels out of this set up before build it up for high boost that be sweet cuz thats low 12s or 11s dependin on track tires etc. by end of summer it will defently be fully built with lots of boost
boosted89si is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bipedbear
Turbo Parts For Sale
1
06-18-2004 02:23 PM
whiteb16crx
Hybrid/Tech
5
01-13-2003 11:00 PM
1337
Hybrid/Tech
10
12-30-2002 02:32 PM
sleepin Crx
Forced Induction
11
12-28-2002 06:16 PM
1stproject
Forced Induction
6
12-20-2002 04:08 PM



Quick Reply: my 1st kit



All times are GMT -5. The time now is 03:57 AM.