HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   my 1st kit (https://www.homemadeturbo.com/forced-induction-7/my-1st-kit-34158/)

boosted89si 01-29-2005 03:47 AM

my 1st kit
 
i officaly have started my parts search for my first turbo kit. heres what i am workin wtih. i got a 89crx si. with a b16a1 swap. im lookin to make a sleeper kit by using a side mount or a small front mount. hp goals are like 350 range tuned on hondata. i like to go with a straight t3 or a t3/t4 if i can get a good priced one. lookin to make boost alway to redline. lookin to spend like 1.5k up to 2k. anyone got any good set ups i should base mine off of. and i have read the newbe part bout turbos. ;) thanks everyone

chu77 01-29-2005 09:39 AM

Re:my 1st kit
 
if ur running psi more than 8 u should get a front mount IC
and don't foret to built up the block and rods and ----

turboboy 01-29-2005 09:41 AM

Re:my 1st kit
 
350 whp is a tall order...better start reading compressor maps and praying for your internals if you dont beef them up

sohc_mshue 01-29-2005 10:03 AM

Re:my 1st kit
 
your probably gonna need to spend more than 1.5-2k and that sidemount isn't gonna be good at all for 350whp.

djfob 01-29-2005 11:01 AM

Re:my 1st kit
 
After all that reading you're still running hondata? You need uberdata. The money saved can go elsewhere since making 350 whp is going to cost more than 1.5-2k.

boosted89si 01-29-2005 02:05 PM

Re:my 1st kit
 
i meant 350hp after i have motor built. i am just lookin for 275range on like 7 to 10psi

95civic 01-29-2005 03:55 PM

Re:my 1st kit
 
You should focus more on just building a kit to boost a little and get used to it first unless you have been boosted before and understamd turboing.For sure you will need a fmic,dont like it showing?paint it black or use a grill ;)

KFB 01-29-2005 07:58 PM

Re:my 1st kit
 
you should read & learn and set realistic goals before you go talking about a 375hp turbo b16a with sidemount IC that cost you under 2k.
"With great power comes great responsibility."
-Old Dude in Spiderman movie

con 01-29-2005 08:15 PM

Re:my 1st kit
 

Originally Posted by boosted89si
i officaly have started my parts search for my first turbo kit. heres what i am workin wtih. i got a 89crx si. with a b16a1 swap. im lookin to make a sleeper kit by using a side mount or a small front mount. hp goals are like 350 range tuned on hondata. i like to go with a straight t3 or a t3/t4 if i can get a good priced one. lookin to make boost alway to redline. lookin to spend like 1.5k up to 2k. anyone got any good set ups i should base mine off of. and i have read the newbe part bout turbos. ;) thanks everyone

you should start with a d series there cheaper to "cut your teeth on"

boosted89si 01-29-2005 09:55 PM

Re:my 1st kit
 
i been boosted before. just this is my frist build up myself building a kit. reason i didnt go d series is my crx was all ready had ls motor in it before i bought it. i alrdy had the b16 swap so i figure i put the b16 in. i dotn have it all wired up yet cuz i wanted to bring it out turbo. as for money wise i not cheap i just like to be smart shoper. n when u set a goal for as in spending 1.5k to 2k u know u are goign to go over. so i not worryed bout it cuz i not goign to buy crap parts. n 375 hp i dont think is a goal that is out of reach once build the motor to run high boost. even if i only get 250 at teh wheels out of this set up before build it up for high boost that be sweet cuz thats low 12s or 11s dependin on track tires etc. by end of summer it will defently be fully built with lots of boost


All times are GMT -5. The time now is 06:59 PM.


© 2024 MH Sub I, LLC dba Internet Brands