t_cel_t

or its not opening, but besides that it should not be leaking at all. go buy new o rings they are cheap as ----.

Birdley42008

but would that make my car not start? Also top temp sensor by my tb is not plugged in, it is dangling! I dont think that is a problem though.

t_cel_t

well if there is no fuel getting in your cylinders from either a bad leak on one injector or maby the injector is clogged or the wires arent connected correctly then it might not start. pull an injector and test it to see if it opens. i have seen many cars start and run on 3 cylinders so it should work but if there is no fuel pressure behind the other injectors then it might not, how bad is the leak, like cc/min or cc/sec?

Birdley42008

HAHA! With little help from my ----- confucious sae he helped me realise, I NEED TO SCALE MY AFC! I need to scale them to -38%! And my BTM to 1.25 and try to give it a few cranks. DAMN IM A NOOB!

bitchasscracker

is your map sensor hooked up right and you afc *****


btm at 1.25 is too high

Birdley42008

What do you suggest 1.0

Smith-02

tried and true.

Birdley42008

So it wouldnt start, I tuned it to -35% to get more gas cause it sounded like it needed some! That was exactly it, it started right up at -35% and 1.0 on the btm. I have a check light on a yellow one? I beleive its the cel. Why would it be throwing this, just cause its not tuned, the second o2 sensor is fouled out! Thanks.

confucioussae

yep, check the codes! chances are mostly obd2 complications, stupid *** oxygen sensors good thing she starts! don't rape her until you can strap on a wideband and see where your "tune" is

Birdley42008

No CEL, just need a tune!