I picked this up the other night. I have it all the way "open", which should just use the wastegate spring setting, right? My spring is 5 or 6 lbs. With it like that, I hit 10lbs.

I want to have my low boost setting at 6lbs, and high boost at 10lbs.

Any ideas on why with it all the way open, it pushes up to 10lbs?

 

because its a piece of ----?

10psi is minimum boost anyways, you -----.

 

http://www.turbosmart.com.au/index.php?id=42
I dont know if you bought it new but click on the link and you can download the instructions from the page.

 

\\

my turbosmart dual stage worked perfectly, sounds liek a malfunction on your part.

 

that kinda boost controllers sometimes arent accurate..

buy a boost controller like AVCR or so.. ..

 

walter shut the ---- up, you dont know your ------- from your elbow,

 

Yours let you boost under 10psi?

 

If it is all the way open then it should deffinatly run off of the wastegate's boost setting!