Issue with Turbosmart Dual Stage Boost COntroller
I picked this up the other night. I have it all the way "open", which should just use the wastegate spring setting, right? My spring is 5 or 6 lbs. With it like that, I hit 10lbs.
I want to have my low boost setting at 6lbs, and high boost at 10lbs. Any ideas on why with it all the way open, it pushes up to 10lbs? |
Re: Issue with Turbosmart Dual Stage Boost COntroller
because its a piece of ----? ???
10psi is minimum boost anyways, you -----. |
Re: Issue with Turbosmart Dual Stage Boost COntroller
http://www.turbosmart.com.au/index.php?id=42
I dont know if you bought it new but click on the link and you can download the instructions from the page. |
Re: Issue with Turbosmart Dual Stage Boost COntroller
Originally Posted by FooK
because its a piece of ----? ???
10psi is minimum boost anyways, you -----. my turbosmart dual stage worked perfectly, sounds liek a malfunction on your part. |
Re: Issue with Turbosmart Dual Stage Boost COntroller
that kinda boost controllers sometimes arent accurate..
buy a boost controller like AVCR or so.. ;) .. |
Re: Issue with Turbosmart Dual Stage Boost COntroller
walter shut the ---- up, you dont know your ------- from your elbow,
|
Re: Issue with Turbosmart Dual Stage Boost COntroller
Originally Posted by hotrex
\\
my turbosmart dual stage worked perfectly, sounds liek a malfunction on your part. |
Re: Issue with Turbosmart Dual Stage Boost COntroller
If it is all the way open then it should deffinatly run off of the wastegate's boost setting!
|
All times are GMT -5. The time now is 03:14 PM. |
© 2024 MH Sub I, LLC dba Internet Brands