Ebay turbo setups, B-series...
#1
Ebay turbo setups, B-series...
i found a kit, looked like it was DECENT.. im looking for a complete b-series turbo kit with everything thats a good kit.. any thoughts of this one, where can i find a setup.
im running a gsr with a built head and stock bottem end with new rings. if i where to boost it i would run 9:1 compression pistons, eagle rods and a cometic head gasket, i need alittle more clearence from the pistons and valves.
Heres the kit i thought of..
http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMEWA%3AIT
Need some advise.
im running a gsr with a built head and stock bottem end with new rings. if i where to boost it i would run 9:1 compression pistons, eagle rods and a cometic head gasket, i need alittle more clearence from the pistons and valves.
Heres the kit i thought of..
http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMEWA%3AIT
Need some advise.
#2
Re: Ebay turbo setups, B-series...
Its Chines stuff and may work or may just break into pieces.This is HOME MADE turbo so buying a kit and asking for advice probably wont get you alot of help here.I owuld re sell it on ebay spend some time reading on here and put together a kit yourself.Good luck
#3
Re: Ebay turbo setups, B-series...
Notice the name on the turbo?
Plus, with how heavy turbos are, and with how thin and weak that manifold probably is, I can predict the runners are gonna crack, and probably even rip right off the head flange.
Plus, with how heavy turbos are, and with how thin and weak that manifold probably is, I can predict the runners are gonna crack, and probably even rip right off the head flange.
#5
Re: Ebay turbo setups, B-series...
Honestly do not buy that kit. A guy I know just recently bought that kit and I helped installed it and all I have to say is what a bitch . Also that T4 starts spooling like at around 6k and hes got a gsr motor, too. I recommend not buying that kit.
#6
Re: Ebay turbo setups, B-series...
Thanx for the heads up, ill peice together a kit. T3/T4 .60/.63 turbo, ill have a mani made up from someone on this board. Tial 38mm WG, blitz BOV, 550cc injectors maybe.. already have the frontmount but i think it will be to small.good for 400 hp
plan on trying to get 350-400 whp on a built C1. head is already built, run a cometic headgasket to raise it alittle, clearence issues. 9:1 bottem end. any other thoughts or recommendations from boosted gsr/type r guys.
plan on trying to get 350-400 whp on a built C1. head is already built, run a cometic headgasket to raise it alittle, clearence issues. 9:1 bottem end. any other thoughts or recommendations from boosted gsr/type r guys.
Thread
Thread Starter
Forum
Replies
Last Post
turboDA6
General Discussion
17
08-17-2004 12:34 AM
used2baracer
Forced Induction
31
05-01-2004 11:29 PM