One of the most Ghetto, Homemade Turbo Setups Ever (56K Warning)
04-30-2004, 12:46 AM
#1
1.0 BAR
Thread Starter
Join Date: May 2003
Posts: 362
One of the most Ghetto, Homemade Turbo Setups Ever (56K Warning)
Subject is an 89 CRX Si, with a DX motor w/si tranny converted to multiport, running obd1 P06. Running 6-7 psi.
D15b7 Motor w/Si Trans
obd1 240cc injectors
obd1 P06 Ecu w/Uberdata
DSM Intercooler
DSM BOV
T-25 Turbo w/Excessive Shaft-Play
2 1/2" Downpipe
2 1/4" Catback Exhaust
Haven't ran the car yet (leaky waterpump, gotta fix tomorrow), but here's some pix.
Hella shaftplay T-25
Adapter Plate
Downpipe w/ $4 flexpipe
1st gen Sidemount Intercooler w/ jbwelded bov
jbwelded oil return
Oil Tee/Suply (*Never place the Tee directly on the block.. . u are asking 4 trouble)
Custom Wrench for Clocking Turbos
sexy angle pic
Ultimate sleeper... Bet u wouldn't expect to see this under the hood...
D15b7 Motor w/Si Trans
obd1 240cc injectors
obd1 P06 Ecu w/Uberdata
DSM Intercooler
DSM BOV
T-25 Turbo w/Excessive Shaft-Play
2 1/2" Downpipe
2 1/4" Catback Exhaust
Haven't ran the car yet (leaky waterpump, gotta fix tomorrow), but here's some pix.
Hella shaftplay T-25
Adapter Plate
Downpipe w/ $4 flexpipe
1st gen Sidemount Intercooler w/ jbwelded bov
jbwelded oil return
Oil Tee/Suply (*Never place the Tee directly on the block.. . u are asking 4 trouble)
Custom Wrench for Clocking Turbos
sexy angle pic
Ultimate sleeper... Bet u wouldn't expect to see this under the hood...
04-30-2004, 02:51 AM
#8
0.0 BAR
Join Date: Feb 2003
Posts: 0
Re:One of the most Ghetto, Homemade Turbo Setups Ever (56K Warning)
Don't know what that was all about. 
:P
That's not all that ghetto. Yeah, the parts are cheap, but it looks like you spent good quality workmanship in putting it together. Still the most ghetto of all setups was Danny's (jbwelder). He was hacking up is cross member with a grinder and had his oil pan off, shooting the sparks right into his rods/crank/girdle. We got there to help with the install and he was puzzled when we asked what he was using for "fuel management". lol. He said, "I didn't know I needed that" lol.
:PThat's not all that ghetto. Yeah, the parts are cheap, but it looks like you spent good quality workmanship in putting it together. Still the most ghetto of all setups was Danny's (jbwelder). He was hacking up is cross member with a grinder and had his oil pan off, shooting the sparks right into his rods/crank/girdle. We got there to help with the install and he was puzzled when we asked what he was using for "fuel management". lol. He said, "I didn't know I needed that" lol.
04-30-2004, 03:18 AM
#10
1.0 BAR
Thread Starter
Join Date: May 2003
Posts: 362
Re:One of the most Ghetto, Homemade Turbo Setups Ever (56K Warning)
Originally Posted by RENR
Originally Posted by used2baracer
RENR... u are -------... ur avatar's are guts
