Ebay turbo setups, B-series...
 

i found a kit, looked like it was DECENT.. im looking for a complete b-series turbo kit with everything thats a good kit.. any thoughts of this one, where can i find a setup.

im running a gsr with a built head and stock bottem end with new rings. if i where to boost it i would run 9:1 compression pistons, eagle rods and a cometic head gasket, i need alittle more clearence from the pistons and valves.

Heres the kit i thought of..
http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMEWA%3AIT


Need some advise.

Re: Ebay turbo setups, B-series...
 

Its Chines stuff and may work or may just break into pieces.This is HOME MADE turbo so buying a kit and asking for advice probably wont get you alot of help here.I owuld re sell it on ebay spend some time reading on here and put together a kit yourself.Good luck

Re: Ebay turbo setups, B-series...
 

Notice the name on the turbo?

Plus, with how heavy turbos are, and with how thin and weak that manifold probably is, I can predict the runners are gonna crack, and probably even rip right off the head flange.

Re: Ebay turbo setups, B-series...
 

and have a fun time fabbing up a dp for that bitch, or its gonna cost u an arm, leg and three testicles.

Re: Ebay turbo setups, B-series...
 

Honestly do not buy that kit. A guy I know just recently bought that kit and I helped installed it and all I have to say is what a bitch :X. Also that T4 starts spooling like at around 6k and hes got a gsr motor, too. I recommend not buying that kit.

Re: Ebay turbo setups, B-series...
 

Thanx for the heads up, ill peice together a kit. T3/T4 .60/.63 turbo, ill have a mani made up from someone on this board. Tial 38mm WG, blitz BOV, 550cc injectors maybe.. already have the frontmount but i think it will be to small.good for 400 hp :-\

plan on trying to get 350-400 whp on a built C1. head is already built, run a cometic headgasket to raise it alittle, clearence issues. 9:1 bottem end. any other thoughts or recommendations from boosted gsr/type r guys.