Semnos

What was your A/F ratio when in boost?

J.I.G.

I used that bin in my B18a1 PR4 and had a ruff time. I am now using the PM6_NG25, which runs very smooth. might try this.
http://www.pgmfi.org/phorum/download...PGMFI-NG25.bin

BoosTedZSix

gap your plugs at 28. and it looks like your running lean as ---- on the dyno. thats probably your probably. what the ---- is that on the screen of the computer?? it only goes to 3600 rpm. well it climbs up from 3k to 3.5k. and it looks like they stopped the pull. maybe because it started runnning lean i dont know. post a full dyno sheet with a pull to 7. i dont know. anyone else. but is it me or does the dyno only go to 3.6k

street_kings

Do you happen to have a FULL dyno graph? peak numbers usually don't pop up at 3500.....

Anti-NA

that is my first run, on first run the tuner usually have you go up to 3k only to have an idea of what the af is like. Imagine what the result could be have I step all the way to redline with that kinda of af. Im requestiong the fullgraph from them but they aren't responding to my emails. At around 6k power line start to flux big time, the tuner says it's kicking back the signal due to misfiring, so I don't know.