HomemadeTurbo - DIY Turbo Forum
Page 6 of 9
1
2
3
4
5
6
7
8
9
Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   Done :D Uk Crx Vt (alot of pics 56k no) (https://www.homemadeturbo.com/forced-induction-7/done-d-uk-crx-vt-alot-pics-56k-no-73035/)

marc_vtec 01-29-2007 04:48 PM
Re: Story so far... Uk Crx Vt (alot of pics 56k no) - All fitted, car runs like crap
 
That was the plan, i was gona laminate the mouse, frame it and put it on ebay... but i lost it :(

lumpenst 01-29-2007 06:00 PM
Re: Story so far... Uk Crx Vt (alot of pics 56k no) - All fitted, car runs like
 
isnt the .42 .48 t3 too small for a b series engine?

Oscar 01-29-2007 06:18 PM
Re: Story so far... Uk Crx Vt (alot of pics 56k no) - All fitted, car runs like
 
Originally Posted by turbocivic6776
if tuned for 450 and your running 450 it will be running a tad lean also if you just undo the charge piping and run it w/ the chipped ecu and 440's it should be fine.the ecu should only add fuel when it see's boost via map sensor.
only if he leaves it in closed loop. I've never messed with bre, but im sure it has that option. so dont forget to enable closed loop and just drive like that.

Slo_crx1 01-30-2007 09:30 AM
Re: Story so far... Uk Crx Vt (alot of pics 56k no) - All fitted, car runs like
 
Originally Posted by d112crzy
only if he leaves it in closed loop. I've never messed with bre, but im sure it has that option. so dont forget to enable closed loop and just drive like that.

I've never seen that option on BRE, unless you're talking about the checksum. If you can, post up or send me your Bin file and I'll take a look at it and see if anything's out of the ordinary. You do also know that only certain pr3's and pw0's can be chipped via BRE...check out the pgmfi.org forum for more info.

marc_vtec 02-05-2007 07:55 AM
Re: Done :D Uk Crx Vt (alot of pics 56k no)
 
Right....


£80 ($150 ish) frigging quid in petrol alone to get to my tuner with my car bogging all the way down there...


...get to the tuners look at the laptop and my car is reading boost whilst idling.... long story short it turned out to be a leaky pos ebay dump valve screwing my map sensor up... disconnected the t-piece to the dump valve and it worked fine, idled great and boosted!

All tuned, running 5 psi as i want it to be as safe as possible untill i get some forged bits... still loving this new found power and torque though!

Car is leaking oil at the end of the oil feed and im getting boost creep so cannot hit vtec, but that should be sorted soon...


More pics and vids to follow

A very happy
Marc ;D

ososlohatch 02-05-2007 09:29 AM
Re: Done :D Uk Crx Vt (alot of pics 56k no)
 
good to hear its coming along

ososlohatch 02-05-2007 10:28 AM
Re: Done :D Uk Crx Vt (alot of pics 56k no)
 
also you should snap some pics of your radiator setup :P did you just get a half size and snug it up close to the motor ???

marc_vtec 02-06-2007 08:23 AM
Re: Done :D Uk Crx Vt (alot of pics 56k no)
 
:y

whiterice 02-06-2007 10:56 AM
Re: Done :D Uk Crx Vt (alot of pics 56k no)
 
Nice street install. Thumbs up on the project.
The camera work and lighting are pro!
What size rims and tires you running?

ososlohatch 02-06-2007 12:55 PM
Re: Done :D Uk Crx Vt (alot of pics 56k no)
 
Originally Posted by whiterice
Nice street install. Thumbs up on the project.
The camera work and lighting are pro!
What size rims and tires you running?
14's or 15's he should sell them to me those things are sickness


All times are GMT -5. The time now is 03:33 AM.
Page 6 of 9
1
2
3
4
5
6
7
8
9
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands