cracks on wastegate flapper area!! will this thing boost???
#1
cracks on wastegate flapper area!! will this thing boost???
--------------------------------------------------------------------------------
ok guys .. i got a 14b for my junkyard turbo project.. the tubo looked to be good .. no shaft play at all .. so i picked it up for 100 bucks ...
problem is that i didnt take off the 02 housing and when i got it home and did theres a big old crack by the wastegate flapper... is this thing going to boost at all
is there anything i can do to fix this?
here are some pics .. let me know what you all think!!!
ok guys .. i got a 14b for my junkyard turbo project.. the tubo looked to be good .. no shaft play at all .. so i picked it up for 100 bucks ...
problem is that i didnt take off the 02 housing and when i got it home and did theres a big old crack by the wastegate flapper... is this thing going to boost at all
is there anything i can do to fix this?
here are some pics .. let me know what you all think!!!
#2
Re:cracks on wastegate flapper area!! will this thing boost???
post the pics on newbieforces or another host since you have to register on b20vtec and I doubt many of us have the patience for that If they're posted up on another webboard, just get the url from there and post it in [img] tags so the pictures just show up here.
Without seeing the pics, I can't say for sure, but cracks around the wastegate hole are pretty common on used turbos due to the expansion and contraction from it being heated up and cooled down over and over again. As long as the cracks aren't that big it should be fine. Otherwise, it will still be ok, it will just leak a little boost on you.
Without seeing the pics, I can't say for sure, but cracks around the wastegate hole are pretty common on used turbos due to the expansion and contraction from it being heated up and cooled down over and over again. As long as the cracks aren't that big it should be fine. Otherwise, it will still be ok, it will just leak a little boost on you.
#4
Re:cracks on wastegate flapper area!! will this thing boost???
hairline cracks are common but that one is actually pretty bad. very long goes pretty far on both sides. the crack goes beyond the edge of the 2nd pic.
most people are gonna say run it, so let's see what happens.
another option is to weld it, weld the flapper, and run the external wastgegate block off plate.
most people are gonna say run it, so let's see what happens.
another option is to weld it, weld the flapper, and run the external wastgegate block off plate.
#5
Re:cracks on wastegate flapper area!! will this thing boost???
Originally Posted by whiterice
hairline cracks are common but that one is actually pretty bad. very long goes pretty far on both sides. the crack goes beyond the edge of the 2nd pic.
most people are gonna say run it, so let's see what happens.
another option is to weld it, weld the flapper, and run the external wastgegate block off plate.
most people are gonna say run it, so let's see what happens.
another option is to weld it, weld the flapper, and run the external wastgegate block off plate.
#8
Re:cracks on wastegate flapper area!! will this thing boost???
JB weld WILL NOT hold up on a turbo. It will melt off within minutes.
Myself, I would just run it how it is.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Myself, I would just run it how it is.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote