Boost controller
#6
Re:Boost controller
the waste gate (internal) is basically a large spring with a thin peice of rubber over it (a seal). then the pressure on the seal gets high enough to colapse the spring, it opens the waste gate, lowering the pressure, which then lets the spring rebound, closing the waste gate.
#7
Guest
Posts: n/a
Re:Boost controller
A boost controller on an internal wastegate would be put on the wastegate's vacuum line. This way, you can restrict the flow of pressure to the spring, thus increasing the amount of pressure needed to collapse the spring and open the wastegate. Simple, yet effective.
Thread
Thread Starter
Forum
Replies
Last Post
Y2A
Forced Induction
5
04-08-2005 04:12 PM