1st turbo setup and car won't start!!
#31
Re: 1st turbo setup and car won't start!!
ok i have another question i'm not sure about, when i run the engine at idle the a/m oil pressure gauge reads about 80psi and when i slightly rev the engine to say 2-3000rpms it jumps up to about 100psi... is that normal?? i have a tee off the back of the block with the oil feed line going to the left and the sender unit straight off the back. thanks again.
#33
Re: 1st turbo setup and car won't start!!
i got the oil pressure situation fixed, the car just needed to warm up, it idles at 12-15lbs like its supposed too. The car is at the exhaust shop right now getting the IC piping and the downpipe put on...i'll post some pics and maybe a vid when its done!!
Thread
Thread Starter
Forum
Replies
Last Post
streetracer42084
Hybrid/Tech
18
09-05-2006 09:15 PM
crx2fast
General Discussion
0
09-01-2006 10:11 PM
davcivic
Hybrid/Tech
15
05-11-2004 01:32 PM
GUIL
Hybrid/Tech
9
10-23-2003 07:59 PM