put a gas lense on my torch finally. pics
#152
Re: put a gas lense on my torch finally. pics
Originally Posted by thermal
I think that it's only fair to finish my issues with Josh, hence thread jacking this post.
So, on the 11 JULY, he finally admitted to me that he NEVER did send a manifold like he did on 26 JUNE, which he clearly stated that on the previous page here.... ------ WOW!
On 13 JULY, my customer received a manifold. My customer decided to just stay with a 38mm WG flange (with plans that he will go ahead take it to somebody else to have a 44mm flange welded on), although we paid Josh for the 44mm.... but *** it! We couldnt stand this bullshit anymore. We ended up buying a Peakboost manifold as well cuz of the BS we had to go through.
As far as the quality of this manifold..... my customer is not happy. I dont even want to hear about us rushing Josh about this manifold in which may have affected the workmanship... to me, that is a lame excuse. My customer is just gonna sell this manifold.
Thanks to Corey for trying to keep me updated and keeping me calm. He also apologized for all this BS I had to go through.
This is the end of the discussion.
For what's it worth, I wish CC-FAB goodluck with their business..................................
So, on the 11 JULY, he finally admitted to me that he NEVER did send a manifold like he did on 26 JUNE, which he clearly stated that on the previous page here.... ------ WOW!
On 13 JULY, my customer received a manifold. My customer decided to just stay with a 38mm WG flange (with plans that he will go ahead take it to somebody else to have a 44mm flange welded on), although we paid Josh for the 44mm.... but *** it! We couldnt stand this bullshit anymore. We ended up buying a Peakboost manifold as well cuz of the BS we had to go through.
As far as the quality of this manifold..... my customer is not happy. I dont even want to hear about us rushing Josh about this manifold in which may have affected the workmanship... to me, that is a lame excuse. My customer is just gonna sell this manifold.
Thanks to Corey for trying to keep me updated and keeping me calm. He also apologized for all this BS I had to go through.
This is the end of the discussion.
For what's it worth, I wish CC-FAB goodluck with their business..................................
def on par with that ---- peakboost u guys bought. i know ive seen a few first hand. so tell me what was wrong with that manifold for 430 dollars. ? probably the fact he didnt pay 430? you prob charged him 600. that coupled with im sure the subparr fabrication skills you unleashed on his car.
this is the exact manifold he recieved, with bmc premium ported flanges. 430 shipped. your welcome
wtf are you guys expecting ------- full race for that price?
im sure your guy doesnt have any issue whatsoever, you just might want people to think he does.
have you seen it first hand? bte arnel i dont need your luck. but maybe i will make you an instructional cd on how to mig weld properly.
#154
Re: put a gas lense on my torch finally. pics
Josh, why dont you shut the *** already man. First off, you lied to me and it shown is all over this post, unless one of your buddies edit it. Second, look closely at that picture. As you said, that is the "exact" manifold you sent...... look again, there is no WG flange on there.
You suck at getting facts Josh. Stop this before you dig a deeper hole for yourself. I'm not going to criticize your work, I never did..... look anywhere on any of your post. Not a single criticism about quality, NOR say that you are a scammer. Read what I said. I said that HE was not happy with your workmanship..... NOT me.
$430? get the *** outta here...You are a straight up LIAR!
You didnt even offer a ------- refund for us to get the rest of the money back. The original deal was a 44mm WG flange. Due to inconvenience, he agreed that he should go ahead take whatever he can from you..... the one with a 38mm WG flange..... which REMEMBER Josh?...... YOU TOLD ME WAS SENT ON THE 26TH OF JUNE, BUT MAGICALLY, YOU WERE ABLE TO RETRIEVE THAT somewhere is the USPS system and decided to sent it out VIA DHL between 10-11 JULY instead..... ha ha ha NICE one.
Lastly, I did not make a single penny on this deal Josh. Again, get your facts straight. He gave me $475 cash. I went to the post office, got the money order and sent it straight to you on 25 APRIL. You can ask my customer again if you want.
...what is this?
Go make manifolds.... you are even that much of a ******** after I wished you luck......welding is my hobby, not profession...
..... seriously...... stop this bullshit now. You are a LIAR.... bottom line.
You suck at getting facts Josh. Stop this before you dig a deeper hole for yourself. I'm not going to criticize your work, I never did..... look anywhere on any of your post. Not a single criticism about quality, NOR say that you are a scammer. Read what I said. I said that HE was not happy with your workmanship..... NOT me.
$430? get the *** outta here...You are a straight up LIAR!
You didnt even offer a ------- refund for us to get the rest of the money back. The original deal was a 44mm WG flange. Due to inconvenience, he agreed that he should go ahead take whatever he can from you..... the one with a 38mm WG flange..... which REMEMBER Josh?...... YOU TOLD ME WAS SENT ON THE 26TH OF JUNE, BUT MAGICALLY, YOU WERE ABLE TO RETRIEVE THAT somewhere is the USPS system and decided to sent it out VIA DHL between 10-11 JULY instead..... ha ha ha NICE one.
Lastly, I did not make a single penny on this deal Josh. Again, get your facts straight. He gave me $475 cash. I went to the post office, got the money order and sent it straight to you on 25 APRIL. You can ask my customer again if you want.
...what is this?
bte arnel i dont need your luck. but maybe i will make you an instructional cd on how to mig weld properly
..... seriously...... stop this bullshit now. You are a LIAR.... bottom line.
#156
Re: put a gas lense on my torch finally. pics
god damn if you could be any worse at customer service, telling the truth, quality products etc i would be amazed. in years ive NEVER seen a single person post anything to the effect of "look how happy i am with hotrex".......every customer you get hates you and for a good reason, you treat every one of them like ----.....i dont care if your new "business venture" works out or not, im just calling it how i see it, you suck terribly at running anything you could even try and consider a business.
#157
Re: put a gas lense on my torch finally. pics
Originally Posted by thermal
Josh, why dont you shut the *** already man. First off, you lied to me and it shown is all over this post, unless one of your buddies edit it. Second, look closely at that picture. As you said, that is the "exact" manifold you sent...... look again, there is no WG flange on there.
You suck at getting facts Josh. Stop this before you dig a deeper hole for yourself. I'm not going to criticize your work, I never did..... look anywhere on any of your post. Not a single criticism about quality, NOR say that you are a scammer. Read what I said. I said that HE was not happy with your workmanship..... NOT me.
$430? get the *** outta here...You are a straight up LIAR!
You didnt even offer a ------- refund for us to get the rest of the money back. The original deal was a 44mm WG flange. Due to inconvenience, he agreed that he should go ahead take whatever he can from you..... the one with a 38mm WG flange..... which REMEMBER Josh?...... YOU TOLD ME WAS SENT ON THE 26TH OF JUNE, BUT MAGICALLY, YOU WERE ABLE TO RETRIEVE THAT somewhere is the USPS system and decided to sent it out VIA DHL between 10-11 JULY instead..... ha ha ha NICE one.
Lastly, I did not make a single penny on this deal Josh. Again, get your facts straight. He gave me $475 cash. I went to the post office, got the money order and sent it straight to you on 25 APRIL. You can ask my customer again if you want.
...what is this?
Go make manifolds.... you are even that much of a ******** after I wished you luck......welding is my hobby, not profession...
..... seriously...... stop this bullshit now. You are a LIAR.... bottom line.
You suck at getting facts Josh. Stop this before you dig a deeper hole for yourself. I'm not going to criticize your work, I never did..... look anywhere on any of your post. Not a single criticism about quality, NOR say that you are a scammer. Read what I said. I said that HE was not happy with your workmanship..... NOT me.
$430? get the *** outta here...You are a straight up LIAR!
You didnt even offer a ------- refund for us to get the rest of the money back. The original deal was a 44mm WG flange. Due to inconvenience, he agreed that he should go ahead take whatever he can from you..... the one with a 38mm WG flange..... which REMEMBER Josh?...... YOU TOLD ME WAS SENT ON THE 26TH OF JUNE, BUT MAGICALLY, YOU WERE ABLE TO RETRIEVE THAT somewhere is the USPS system and decided to sent it out VIA DHL between 10-11 JULY instead..... ha ha ha NICE one.
Lastly, I did not make a single penny on this deal Josh. Again, get your facts straight. He gave me $475 cash. I went to the post office, got the money order and sent it straight to you on 25 APRIL. You can ask my customer again if you want.
...what is this?
Go make manifolds.... you are even that much of a ******** after I wished you luck......welding is my hobby, not profession...
..... seriously...... stop this bullshit now. You are a LIAR.... bottom line.
its the exact same manifold. i took the pic before i welded on the 38mm wastegate. have him take a pic and compare,
i just dont understand how he wasnt happy, the manifold was way nicer than the price reflects, either way this is done no need to post anymore.
this bullshit is stupid.
Thread
Thread Starter
Forum
Replies
Last Post
kenmastajy
Forced Induction
7
02-07-2011 02:50 PM
Turblow
Fabrication
7
12-19-2006 05:25 PM