Re: Budget big brake how to
 

what year? These fit no problem? I've been wanting to do the hype r brakes on the del sol for awhile.

Think i need to make it drive first though :-[

Re: Budget big brake how to
 

i'm pretty sure the mk4 rotors are the same as the coraddo rotors, that's just speculation though based off of the vw kits, so you might want to look that up.

Re: Budget big brake how to
 

Then why the hell were mine re-drilled when I bought them from Fastbrakes?

:-\

Re: Budget big brake how to
 

He got a deal on some that way, duh. I remember when Brian Hasty started Fastbrakes, the rotors he used, and how the prices used to be reasonable.

Re: Budget big brake how to
 

ill run soon with 280 corrado rotors (powerslot maybe) with Del Sol VTEC /EG6 EDM calipers , im not sure which mc will get yet. i think will get del Sol vtec, is it the same than integra DA?


about this how to. it's sweet!

Re: Budget big brake how to
 

Corrado g60 rotors. The vr6's had 5 bolts on the hubs...

Re: Budget big brake how to
 

all Mk4's were 5x100, and are a completely diff rotor than g60 rado ones



maybe he started usiing diff rotors. rado g06's are 4x100 no need to redrill

Re: Budget big brake how to
 

I think i was thinking of the mk4 rear calipers on mk2 and mk3's

Re: Budget big brake how to
 

Thought I'd revive this a bit with my info.

Corrado rotors have too little offset (tophat is not deep enough). You'd need to space your calipers half an inch out so they would actually go onto the rotor.


Before I left my last job, I bought 2 sets of remanufactured 95ish Accord Wagon calipers (same as ITR). I shaved 1/8" off each to w/in .0002" (Sony dials on Bridgeports FTW). Unfortunately I only had cash to do 1 set of rotors.

On a 4th gen civic with 9" rotor hubs, you use the shaved ITR calipers and any 10" 5th gen Civic rotor.
On a 5th gen civic with 10" rotor hubs, you use the shaved ITR calipers and the 11.1" Prelude VTEC rotors ('95 i think), redrill the 4x114 to 4x100.

Re: Budget big brake how to
 

For the sixth gen civics the same concept can be had with
DC Integra steering knuckle + Legend Calipers + Corrado rotors

Correct?