Z6 OBD1 UBERDATA Datalogging problems
09-10-2005, 03:15 PM
#1
1.5 BAR
Thread Starter
Join Date: May 2005
Posts: 698
Z6 OBD1 UBERDATA Datalogging problems
i have swapped a D16Z6 into my 91 CRX Si
i have the RYWIRE conversion harness and a chipped P28 set up for datalogging
i have my laptop set up with uberdata
im trying to use the datalogging feature and im getting no communication between the laptop and the ecm
i have the choice of COM1 COM2 COM3 and COM4 in uberdata
COM2 and COM3 say not avail if i try to select them
'
if i choose 1 or 4 and turn on TPS it says 56 and stays right there regardless of what i do with the pedal, RPM stays still at 59 or somewhere around there
results are the same with the car running or not
the light on the datalogging board in the ECM turns on
the previous owner of the ECM is CYBERDX and he says it worked fine for him
i also get a CONSTANT SOLID CEL
the chip in the ecm is currently tuned for a BOOSTED H22 and i am running an NA Z6 im wondering how many of the issues are caused by that
hoping to get my OSTRICH in the next couple of weeks and im assuming that will fix the CEL but im still not sure on the datalogging
also i did the CEL jumper switch and i still get a solid CEL regardless of the switch position
oh and the car is white
i have the RYWIRE conversion harness and a chipped P28 set up for datalogging
i have my laptop set up with uberdata
im trying to use the datalogging feature and im getting no communication between the laptop and the ecm
i have the choice of COM1 COM2 COM3 and COM4 in uberdata
COM2 and COM3 say not avail if i try to select them
'
if i choose 1 or 4 and turn on TPS it says 56 and stays right there regardless of what i do with the pedal, RPM stays still at 59 or somewhere around there
results are the same with the car running or not
the light on the datalogging board in the ECM turns on
the previous owner of the ECM is CYBERDX and he says it worked fine for him
i also get a CONSTANT SOLID CEL
the chip in the ecm is currently tuned for a BOOSTED H22 and i am running an NA Z6 im wondering how many of the issues are caused by that
hoping to get my OSTRICH in the next couple of weeks and im assuming that will fix the CEL but im still not sure on the datalogging
also i did the CEL jumper switch and i still get a solid CEL regardless of the switch position
oh and the car is white
09-10-2005, 03:22 PM
#2
1.5 BAR
Thread Starter
Join Date: May 2005
Posts: 698
Re: Z6 OBD1 UBERDATA Datalogging problems
also whats this i read about only certain versions of UBERDATA working with the OSTRICH
how do i know if my version is compatable
does the version that works with the ostrich not work with a chip burner?
how do i know if my version is compatable
does the version that works with the ostrich not work with a chip burner?
09-10-2005, 05:52 PM
#4
0.5 BAR
Join Date: Jul 2005
Posts: 148
Re: Z6 OBD1 UBERDATA Datalogging problems
sounds like you have a bad burn or something. probably because the chip is for the completely wrong setup. burn a basemap more suited for your engine.
was the previous owner of the ecu using uberdata? was the chip burned with uberdata? in case you didnt know, you have to burn the chip with uberdata to be able to datalog with uberdata.
was the previous owner of the ecu using uberdata? was the chip burned with uberdata? in case you didnt know, you have to burn the chip with uberdata to be able to datalog with uberdata.
09-10-2005, 11:01 PM
#5
3.0 BAR
Join Date: Jul 2003
Posts: 6,449
Re: Z6 OBD1 UBERDATA Datalogging problems
I believe you sent me an email on this and I replied...
A lot of your questions are all answered on the Uber Forum as well.
www.uberdata.info
A lot of your questions are all answered on the Uber Forum as well.
www.uberdata.info
12-30-2005, 04:00 PM
#9
1.0 BAR
Join Date: Dec 2005
Posts: 357
Re: Z6 OBD1 UBERDATA Datalogging problems
Originally Posted by solfly
also whats this i read about only certain versions of UBERDATA working with the OSTRICH
how do i know if my version is compatable
does the version that works with the ostrich not work with a chip burner?
how do i know if my version is compatable
does the version that works with the ostrich not work with a chip burner?
Originally Posted by solfly
i also forgot to mention that the carr wil not rev above ~4000 rpm
may be something in the chip not sure
thanks for any help
may be something in the chip not sure
thanks for any help
Thread
Thread Starter
Forum
Replies
Last Post
Mz3bo
Engine Management
90
08-16-2007 12:10 AM
hamburgler
Engine Management
2
07-22-2007 08:26 PM
