/r/ Fuel efficient basemaps for stock D and B engines?
#1
/r/ Fuel efficient basemaps for stock D and B engines?
what's up nigs? With gas prices soaring with no signs of change, I figured it would be a good idea to post some fuel efficient basemaps for D and B series setups..
If I still had my wideband I would make one for my stock B16A, so If you have any please provide. Thanks for your time and contribution.
If I still had my wideband I would make one for my stock B16A, so If you have any please provide. Thanks for your time and contribution.
#2
Guest
Posts: n/a
Re: /r/ Fuel efficient basemaps for stock D and B engines?
Jesus Christ it's not that hard, get a map and spend LITERALLY ONE MINUTE and you can lean the whole thing out.
But your whole question is idiotic. A basemap is a basemap, I don't make any basemaps "extra rich" in vacuum, I always make them as close to stock as possible.
But your whole question is idiotic. A basemap is a basemap, I don't make any basemaps "extra rich" in vacuum, I always make them as close to stock as possible.
#3
Re: /r/ Fuel efficient basemaps for stock D and B engines?
anyone who has the ability to upload a new map should have the tools to make their own.
you do get one bonus point, however, for being a b-tard. and for those of you that don't know i'm referring to 4chan not the b-series :P
you do get one bonus point, however, for being a b-tard. and for those of you that don't know i'm referring to 4chan not the b-series :P
#8
Re: /r/ Fuel efficient basemaps for stock D and B engines?
JD, so when dave did my chipping, without disableing the O2 it was always trying to settle on 14.7 A/F under cruise conditions??
Yes, I'm a tuning newb, I've got ALOT to learn........but I finally WANT to learn it. Mostly for MPG tuning. Buddy in Mich is going for 60 mpg using an updated version of my old setup and alot more aero treatments.
Yes, I'm a tuning newb, I've got ALOT to learn........but I finally WANT to learn it. Mostly for MPG tuning. Buddy in Mich is going for 60 mpg using an updated version of my old setup and alot more aero treatments.
#9
Re: /r/ Fuel efficient basemaps for stock D and B engines?
Yes, it also tries to tune for 14.7 at idle.
If you bias the maps lean, while it swings rich when the O2 feedback is active, it spends most of it's time lean. Likewise, if the map is rich the O2 feedback will cause the mix to switch lean but it still spends more time rich on average.
You also have to keep in mind the ECU tries to switch around .51 volts, and if the system grounds suck the O2 is putting out >.51 to get .51 at the ECU... Generally a great idea to lower the value, if you can. Also, I like using wideband closedloop on eCtune, if you have a wideband that you can program the outputs on (JAW, LM-1/LC-1, etc) then 13:1 is 0v and 17:1 is 5v and if you lose .25 volts somewhere along the way it doesn't mean a whole hell of a lot compared to the stock O2 analogy.
Oh, yah? T30 for $100 shipped with no major defects is a great deal. Do it.
If you bias the maps lean, while it swings rich when the O2 feedback is active, it spends most of it's time lean. Likewise, if the map is rich the O2 feedback will cause the mix to switch lean but it still spends more time rich on average.
You also have to keep in mind the ECU tries to switch around .51 volts, and if the system grounds suck the O2 is putting out >.51 to get .51 at the ECU... Generally a great idea to lower the value, if you can. Also, I like using wideband closedloop on eCtune, if you have a wideband that you can program the outputs on (JAW, LM-1/LC-1, etc) then 13:1 is 0v and 17:1 is 5v and if you lose .25 volts somewhere along the way it doesn't mean a whole hell of a lot compared to the stock O2 analogy.
Oh, yah? T30 for $100 shipped with no major defects is a great deal. Do it.
#10
Re: /r/ Fuel efficient basemaps for stock D and B engines?
well for right now I'm only gonna monitor/datalong the stock mapping until I learn more using HULOG or HONDALOG and then learn about and Ostrich or Burn1, then finally a wideband.
Slow steps, nothing major.
One question I need to research is would I have a use for a knock sensor? I've never heard my D15B7 rattle/ping under light cruising on the old Dave tune.
Is there a working link to the old PGMFI Wiki? I've got the Moates Tuning with Crome v1.06 to read tonight. Mine you I'm only working on MPG right now. Heck the current motor never gets of 4000 rpm.
Slow steps, nothing major.
One question I need to research is would I have a use for a knock sensor? I've never heard my D15B7 rattle/ping under light cruising on the old Dave tune.
Is there a working link to the old PGMFI Wiki? I've got the Moates Tuning with Crome v1.06 to read tonight. Mine you I'm only working on MPG right now. Heck the current motor never gets of 4000 rpm.